Samsung DVD-AR650 instruction manual Unpacking

Getting Started

▌Step 4 : Playing

To start playback select the title you want to play from the Title list.

A DVD consists of sections called titles, and sub sections called chapters.

During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically when you finalize recording on DVD-R/DVD-RW discs in Video mode.

▌Step 5 : Editing a recorded disc

Editing on discs is easier than editing on conventional video tapes. The recorder supports many different edit functions, possible only with DVDs.

With a simple and easy edit menu, you can operate various edit functions, such as delete, copy, rename, lock, etc., on a recorded title.

With this recorder, you can create playlists using a DVD- RAM/DVD-RW in VR mode. Once a playlist is created you can create/edit a new playlist on the same disc without changing the original recording.

▌Step 6 : Finalizing & Playing on other DVD components

To play your DVD on other DVD components, finalizing may be necessary. First, finish all editing and recording operations, then finalize the disc.

When using a DVD-RW disc in VR Mode

Although finalizing is generally unnecessary when playing the disc on a VR Mode compatible component, a finalized disc should be used for playback.

When using a DVD-RW disc in Video Mode

The disc should be finalized first to enable playback on anything other than this recorder. No more editing or recording can be made on the disc once it has been finalized.

When using a DVD-R disc

You should finalize the disc to play it on a component other than this recorder. No more editing or recording can be made on the disc once it has been finalized.

■ You can finalize automatically using the EZ REC MODE. (See page 54)

Unpacking

▌Accessories

Check for the supplied accessories below.

Video/Audio Cable	IR Blaster cable
(AC39-00073A)	(AK39-00055A)

Remote Control	Batteries for Remote
(AK59-00062J)	Control (AAA Size)
	(AC43-12002H)

Instruction Manual	Quick Guide
(AK68-01378A)	(AK68-01379A)

▌Preparing the Remote Control

Install Batteries in the Remote Control

•Open the battery cover on the back of the remote.

•Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.

•Replace the battery cover.

If the remote control does not operate properly:

•Check the polarity +/- of the batteries.

•Check if the batteries are drained.

•Check if the remote sensor is blocked by obstacles.

•Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

English - 10