Samsung DVD-AR650 CM Skip Time Setting, CH Digit Lock, Mode for SET button, Brand Code

DVD-Recorder		Set Top Box Control
No Disc
Timer Rec.	Control		: Off	►
Setup	Connection		: CH3	►
	CH Digit Lock		Off
	Mode for SET buttonLock to two digits
	Brand Code		: 0000	►

MOVE	ENTER	RETURN	EXIT
DVD-Recorder		Set Top Box Control

No Disc
Timer Rec.	Control		: Off	►
Setup	Connection		: CH3	►
	CH Digit Lock		: Off	►
	Mode for SET buttonOff
	Brand Code		Mode 1
			Mode 2
MOVE	ENTER	RETURN		EXIT

DVD-Recorder Set Top Box Control

No Disc
Timer Rec.
Setup	Enter the brand code of your set top box.

0 0 0 0

0~9 NUMBER ENTER RETURN EXIT

DVD-RecorderSystem

No Disc
Timer Rec.	Set Top Box Control			►
Setup	CM Skip Time		15 Sec
	EP Mode Time		30 Sec
	Chapter Creator		60 Sec
	Quick Recording		: Off	►
	Anynet+(HDMI-CEC) : On			►
MOVE	ENTER	RETURN		EXIT

CM SKIP

CH Digit Lock

Select the sub item(Off or Lock to two digits) using the ▲▼ buttons, then press the ENTER button.

•Off : Select this when your cable box or satellite receiver (set top box) only accepts a three or more digit channel number. Normally select this.

•Lock to two digits : Select this when your cable box or satellite receiver (set top box) only accepts a two digit channel number.

Mode for SET button

Some cable boxes or satellite receivers (set top box) require you to press SET after pressing the channel number. If your cable box or satellite receiver (set top box) operates this way, follow the instructions below to set Mode 1 or 2.

Select the sub item(Off, Mode 1 or Mode 2) using the ▲▼ buttons, then press the ENTER button.

Select "Mode 1" or "Mode 2" if your cable box or satellite receiver requires pressing the SET button, after entering the channel number.

•Off : No code is sent when the SET button is pressed. Normally select this.

•Mode 1 or Mode 2 : Sends the channel number you entered.

■ If "Mode 1" does not work, try "Mode 2."

■If your cable box or satellite receiver (set top box) does not respond to either setting, contact the manufacturer.

Brand Code

Enter the brand code of your cable box or satellite receiver (set top box) using the number buttons, then press the ENTER button.

(See "Cable Box/Satellite Receiver Brand Code Table" on pages 81~83.)

■ If you cannot get the recorder to control your cable box/satellite receiver (set top box), check the connection and position of the IR Blaster cable. (page 16)

If your cable box or satellite receiver still does not operate with this recorder, contact your cable company to see if they can provide you with a compatible cable box or satellite receiver.

■This menu may not work depending on your cable box or satellite receiver (set top box).

▌CM Skip Time Setting

When a program recorded on a DVD-RAM, a DVD-RW, DVD-VIDEO or a DVD-R is played, the unit can be set to automatically skip a portion of the program corresponding to a CM(commercial) Skip Time set by the user.

1.With a disc inserted and the unit in Stop mode, press the MENU button on the remote control.

2.Select Setup using the ▲▼ buttons, then press the ENTER or ► button.

3.Select System using the ▲▼ buttons, then press the ENTER or ► button.

System menu will be displayed.

4.Select CM Skip Time using the ▲▼ buttons, then press the ENTER or ► button.

CM Skip Time will be displayed.

5.Select the desired time using the ▲▼ buttons, then press the ENTER or ► button.

6.If you press the CM SKIP button during playback, the section corresponding to the set time is skipped, and then the next section is played.

System Setup

English - 33