Samsung DVD-AR650 instruction manual Sound, Timer Recording, Remote Control Unit, Other

Page 80

▌Sound

No sound.

Checkpoint 1 Are you watching a program in scan mode?

If you are playing a program at a speed other than normal and fast1 speed, the sound will not be heard.

Checkpoint 2

Check the connections and settings.

Checkpoint 3 Check whether the disc is damaged. Clean the disc, if necessary.

Checkpoint 4

Check whether the disc is inserted

 

correctly with the label facing up.

No audio output.

Checkpoint 1 Check whether you have selected the correct digital output options in the Audio Output Options menu.

(See page 38)

▌Timer Recording

Timer lamp flickers.

Checkpoint 1

Check if there is enough space in the

 

disc for recording.

Checkpoint 2

Check whether the current disc is

 

recordable or not.

 

Make sure to check before the start

 

time of recording.

Timer recording does not work properly.

Abnormal HDMI output screen.

Checkpoint 1

If snow noise appears on the screen,

 

it means that the TV does not support

 

HDCP (High-bandwidth Digital Content

 

Protection).

 

If connected via DVI, try turning the DVD

 

Recorder off then On.

HDMI output Jitter

Checkpoint 1

Check your TV system setup correctly.

Checkpoint 2

Screen Jitter may occur when the frame

 

rate is converted from 50Hz to 60Hz

 

for 720p/1080i HDMI (High Definition

 

Multimedia Interface) Output.

Checkpoint 3

Please refer to the user's manual of your TV.

▌Remote Control Unit

The remote control doesn't work.

Checkpoint 1

Point the remote control at the remote

 

control sensor on your DVD recorder.

 

Allow for proper distance. Remove

 

obstacles between your DVD recorder and

 

the remote control.

Checkpoint 2

Check whether the batteries are empty.

▌Other

I forgot my password for parental supervision.

Checkpoint 1 Remove the disc. Press the CH ( / )

buttons on the front panel of the DVD

Checkpoint 1

Checkpoint 2

Re-check the recording time and the end time settings again.

Recording will be cancelled, if the power is disconnected due to a power failure or other similar reason, while recording.

Recorder simultaneously for 5 seconds or

more when the power is on.

All settings including the password will

revert to the factory settings. Do not use

this unless absolutely necessary.

(Note that this function is possible only

when no disc is inserted.)

Additional Information

▌HDMI

No HDMI output.

Checkpoint 1

Check to see that the Video output is HDMI

 

enabled.

Checkpoint 2

Check the connection between the TV and

 

the HDMI jack of the DVD Recorder.

Checkpoint 3

See if your TV supports 480p/720p/1080i

 

resolution.

Is it possible to change a subtitle and an audio signal on a recorded disc?

Checkpoint 1 A recorded disc is played with only the subtitle and the audio signal which were selected during recording.

Other problems.

Checkpoint 1 Read the table of contents and then find and read the section describing your problem, and follow the instructions given.

Checkpoint 2

Turn your DVD recorder off and on.

Checkpoint 3 If the problem still persists, contact a nearby Samsung service center.

English - 80

Page 79 Page 81
Image 80
Page 79 Page 81
Contents DVD-AR650 Getting Started Precaution Important Safety InstructionsMaintenance of Cabinet Disc HandlingDisc Storage Disc SpecificationsDo not use the following discs DVD-RAM Disc Playback and RecordingProtection Contents EZ REC Mode RecordingGeneral Features Recording How to use the DVD RecorderSelect the disc type Unpacking Brand Tour of the Remote Control Front Panel Display DescriptionFront Panel ANT IN/ANT OUT to TV Connects antenna cables Rear PanelHdmi OUT best video quality Connecting the Antenna Cable Antenna + DVD Recorder + TVCorrect Incorrect English Connecting HDMI/DVI to a TV Connecting to a TV with Hdmi JackConnecting to a TV with DVI Jack Hdmi connection descriptionConnecting the Video Cable Connecting to Component Video Input Jacks Y,PB,PRConnecting to an S-Video Input Jack Connecting to a Video Input Jack Connecting the Audio Cable Connecting to your TVSelect one of the Audio connections on the following pages This connection will use your TV’s speakersConnecting to a Stereo Amplifier with Analog Input Jacks Connecting to an AV Amplifier with a Digital Input Jack Connecting External Devices Connecting a Camcorder Enter Button Plugging In & Auto SetupOn-Screen Menu Navigation Daylight Saving Auto Clock SetTime Zone Manual Clock Set Auto Channel MemoryManual Channel Set Setting Up the System Options Set Top Box ControlControl ConnectionCM Skip Time Setting Mode for SET buttonCH Digit Lock Brand CodeEP Mode Time Setting Automatic Chapter CreationQuick Recording Setting Anynet+HDMI-CECTV Menu Language SettingFor using Anynet+HDMI-CEC Digital Caption Setting Up the Audio Options This is only active when a Dolby Digital signal is detectedDigital Output Dynamic CompressionVideoDisplay Setting This allows you to set up the TV screen size settingsTV Aspect Input LevelHDMI/DVI Resolution Black Level3D Noise Reduction DivXR RegistrationParental Control Setting the Rating LevelSetting the Digital Rating Changing the Password EPG-Electronic Program GuideEPG Timer Recording Full Guide When moving within the Channel tableWhen moving within the Time Table Viewing Full Guide and Mini GuideDVD-R Recordable discsDVD-RAM DVD-RW DVD-RWVideo mode/-R DVD-RAM/-RWVR modeRecording Formats Recording Mode Unrecordable VideoConcerning Copy Control Signals Content Protection for Recordable Media CprmAbout the Info Button Press the Info buttonRecording from External Equipment Recording immediatelyRecording the current TV program you are watching Copying from a Camcorder To stop recordingMaking a One Touch Recording OTR 030 100 130 200 300 400 offSetting a Timer Recording Mode Record modeIf the timer settings overlap Editing the Scheduled Record ListDeleting the Scheduled Record List Recording the Scheduled Record ListEZ REC Mode Region code DVD-Video only Disc types that can be playedPlaying a Disc Discs That Cannot be PlayedUsing the Disc Menu & Title Menu Using the Playback Related ButtonsFor DVD-VIDEO Discs For DVD-RAM/DVD±RW/±R DiscsSearching Chapters or Tracks Slow Motion PlayStep Motion Play Using the Anykey Button Moving to a Desired Scene DirectlyPlaying Repeatedly Playing a Certain Section RepeatedlyUsing One Touch button Selecting the SubtitleSelecting the Audio language Changing the Camera AngleUsing Bookmarks Setting BookmarksZooming-In Normal size → 2X → 4X → 2X →normal sizeUsing Markers Setting MarkersClearing a bookmark Playing Back a MarkerButtons on the Remote Control Used for CD Playback Audio CDCD-DA Screen Elements Play Mode iconPlaying an Audio CD/MP3 Playing an Audio CDCD-DAMP3 Screen Elements Play Mode icon Playing an MP3 DiscPlaying Repeatedly To return to normal playbackPlay Option Mode Playing a Picture CDTo Program Tracks You can register a maximum of 30 tracks in the playlistMPEG4 Function Description Playing an MPEG4 DiscAn MPEG4 File is used to contain audio and video data Playing the Title List Title List Screen ElementsBasic Editing Title List Renaming Labeling a TitleThis section introduces basic functions of DVD editing Title ListLocking Protecting a Title Deleting a TitleDeleting a Section of a Title Edit Title List Screen ElementsAdvanced Editing Playlist Creating a PlaylistPlaying Entries in the Playlist Follow these instructions to play the playlist entriesRenaming a Playlist Entry Editing a Scene for the PlaylistPlaying a Selected Scene Follow these instructions to edit scenes for a playlistFollow steps 1 to 3 of Editing a Scene for the Playlist on Modifying a Scene Replacing a SceneMoving a Scene Changing the Position of a Scene Adding a Scene Deleting a SceneDisc Manager Copying a Playlist Entry to the PlaylistDeleting a Playlist Entry from the Playlist Editing the Disc NameDVD-VR Disc DVD-RAM DVD-RW Disc ProtectionFormatting a Disc DVD-RWVRF Unfinalizing a Disc V/VR modeFinalizing a Disc Disc protection should be disabled first Delete All Title ListsVideo PowerPlayback Timer Recording Remote Control UnitSound OtherCable Box/Satellite Receiver Brand Code Table Cable box brandTFC Satellite receiver brand HTSError Message Solutions Error Message Solution / ExplanationError Message Solutions Specifications Audio OutputNTSC, Atsc MPEG-IIWarranty Limited Warranty to Original PurchaserContact Samsung World Wide Region Country Customer Care Center Web SiteTEL 1-800-SAMSUNG Service Division Headquarters
Top Page Image Contents