System Setup
DVD-Recorder Audio
No Disc |
|
|
|
Timer Rec. | Digital Output | : PCM | ► |
Setup | DTS | : Off | ► |
| Dynamic Compression : On | ► |
MOVE ENTER RETURN EXIT
No Disc |
|
|
|
Timer Rec. | Digital Output | PCM |
|
Setup | DTS | Bitstream |
|
| Dynamic Compression : On | ► |
MOVE ENTER RETURN EXIT
Setting Up the Audio Options
You can connect the
This allows you to setup the audio device and sound status settings depending on the audio system in use.
1.With the unit in Stop mode/No Disc mode, press the MENU button on the remote control.
2.Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
3.Select Audio using the ▲▼ buttons, then press the ENTER or ► button.
4.Select the sub menu(Digital Output, DTS, Dynamic Compression) using the ▲▼ buttons, then press the ENTER or ► button.
Select the item that matches the audio connection you’ve selected on pages 23~35 (Method 1, 2 and 3).
Digital Output
•PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM if your amplifier system is stereo and/or Dolby Prologic.
•Bitstream : Outputs Bitstream.
Select Bitstream if your amplifier system supports multi channel digital audio surround decoding such as Dolby Digital and/or DTS.
No Disc |
|
|
|
|
Timer Rec. | Digital Output | : PCM | ► | |
Setup | DTS |
| Off |
|
| Dynamic CompressionOn |
| ||
MOVE | ENTER | RETURN | EXIT | |
|
|
|
| Audio |
No Disc |
|
|
|
|
Timer Rec. | Digital Output | : PCM | ► | |
Setup | DTS |
| : Off | ► |
| Dynamic CompressionOff |
| ||
|
|
| On |
|
MOVE ENTER RETURN EXIT
DTS
•Off : Doesn’t output DTS bitstream.
•On : Outputs DTS bitstream. (via Digital Audio Output)
Select DTS when connecting to a digital amp with a DTS decoder.
•When DTS soundtrack is played, sound is not output from Analog Audio Output.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
•Off : You can enjoy the movie with the standard Dynamic Range.
•On : When movie soundtracks are played at low volume or from small speakers, the system can apply appropriate compression to make low- level content more intelligible and prevent dramatic passages from getting too loud.