| Channel Set | |
No Disc |
|
|
Timer Rec. | Antenna/Cable TV : Antenna | ► |
Setup | Auto Channel Memory | ► |
| Channel Add/Delete | ► |
MOVE | ENTER | RETURN | EXIT |
|
|
| |
|
| Channel Add/Delete | |
No Disc |
|
| |
Timer Rec. | Select channel : | 2 | |
Setup | |||
|
|
Add |
| Delete |
0~9 NUMBER | ENTER | RETURN | EXIT |
Manual Channel Set
Manual Channel Set can be used after you have first performed Auto Channel Memory. Use the Manual Channel Setting to delete unnecessary channels.
1.With the unit in Stop mode, press the MENU button.
2.Press the ▲▼ buttons to select Setup, then press the ENTER or ► button.
3.Press the ▲▼ buttons to select Channel Set, then press the ENTER or ► button.
4.Press the ▲▼ buttons to select Channel Add/Delete, then press the ENTER or ► button.
5.Press the ▲▼ or number buttons to select the channels you want to add or delete on the Select channel screen. Then, press the ENTER button.
•Using CH ( 
) buttons for channel selection allows the user to add/delete one channel at a time.
•Using ▲▼ buttons for channel selection jumps to the next channel memorized in Auto Channel Memory.
6.Press the ◄► buttons to select Add or Delete, then press the ENTER button.
•The message “Channel is added.” or “Channel is deleted.” will be displayed in the center of the screen.
•Continue to add or delete as many channels as you want to memorize or delete. This can be used to add channels not stored automatically due to weak signal strength.
•Press the RETURN button to return to the previous menu. Press the EXIT button to exit the menu.