Samsung DVD-AR650 instruction manual EZ REC Mode

Recording

Press “On” to confirm EZ REC mode.

Otherwise press “Off”

On Off

Disc Initialize (DVD-V)

Now, initializing..

50%

Disc Finalize

Processing..

50%

EZ REC MODE

This function allows you to Initialize and Finalize a disc automatically.

1.With the unit in Stop/No Disc mode, press the EZ REC MODE button on the remote control.

2.Press the ◄ ► buttons to select On, and then press the ENTER button.

The EZ REC MODE is set up.

3.Insert a disc.

If the disc is new, it will initialize automatically.

4.Press the REC button.

5.EZ REC MODE will Automatically Finalize the disc under the following conditions.

After the disc is finalized, it will play in most DVD players/drives.

-When you press the OPEN/CLOSE button on your DVD Recorder after recording on at least 30% of the disc. The tray will open after the disc has been finalized.

-When the disc is full, it will finalize automatically and the Recorder will remain in stop mode.

-When you make a timer recording and it occupies at least 30% of the disc, the disc will finalize automatically and the Recorder will power off. Please note that auto finalization will not work if the Recorder has more than one Timer Recording set in the Scheduled Record List.

■If you insert a new DVD-RW disc, it will be formatted in V mode after auto initializing.

■If you select off, you must initialize (see page 45) and finalize the disc manually in the Disc Manager menu.(see page 77)

■The length of Recording is different according to recording mode. (see page 46)

English - 54