01616A
Tuner Band Setting
Auto Channel Search
GB
1
This feature allows you to manually set the
•Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong channel numbers.
1Open “SETUP MENU”
Press the SETUP button.
2Select “VCR & Channel Setup”
Using the up/down, move the selection arrow to “VCR & Channel Setup,” then push right to select.
3Select “Channel Setup”
Move the selection arrow to “Channel Setup,” then push right to select.
4Select “Tuner Band”
Move the selection arrow to “Tuner Band,” then push right to select from the following options:
•Auto - Automatically detects the Tuner Band.
•Antenna - Indicates that the
•Cable - Indicates that the
Auto Channel Search will automatically seek and store all active channels in your area.
1Open “SETUP MENU”
Press the SETUP button.
2Select “VCR & Channel Setup”
Using the up/down, move the selection arrow to “VCR & Channel Setup,” then push right to select.
3Select “Channel Setup”
Move the selection arrow to “Channel Setup,” then push right to select.
4Run “Auto Channel Search”
Move the selection arrow to “Auto Channel Search,” then push right to select.
•The
•When finished, the lowest channel found will be displayed.
GB
1
18
19