Audio Dubbing a Pre-recorded Videocassette

01616A DVD-V8000/TWN-Eng4 8/27/56 8:58 AM Page 54

Audio Dubbing a Pre-recorded Videocassette

With the Audio Dubbing function, you erase the previously recorded sound and replace it with a new soundtrack from:

◆ A CD, DVD

◆ A microphone connected to a sound system ◆ A cassette player

Restriction:

How to Set a Timer Recording

Insert a blank tape with a Record Safety Tab into the VCR deck. The Timer Recording Feature allows you to program up to 16 events at a time to record up to a year in advance.

Set the TV to channel 3 or 4 (whichever the switch is set to on the back of the DVD-VCR).

Before You Begin...

• Power on the DVD-VCR

A.Dub

Audio dubbing is applicable only to the mono audio track (normal audio).

1Connect an RCA audio cable to the appropriate output on your sound system (cassette player for example).

2Connect the other end of the RCA audio cable to the audio input connectors (L, R) on the Rear of your DVD-VCR.

3Insert the pre-recorded videocassette on which the audio track is to be replaced, and press the ll to start playback.

4Search back slightly beyond the Audio Dub start point using the button.

5Press the ll button.

Press the ll button one more time to make PAUSE mode.

6Press A.DUB.

Result: Your VCR is now in the Audio dubbing still mode.

7Press the TV VIEW button to select Audio dubbing source.

ex) If you want to dub external cassette player, then select LINE2.

8On the sound system, locate the point on the cassette at which you wish to start playback.

Example: The track that you wish to record on the cassette.

9When you are ready:

◆Start playback on the sound system

◆Press the ll on the remote control.

Result: The soundtrack is replaced on the pre-recorded cassette.

➢The new sound will be recorded on the normal sound track of the tape, and the original sound will remain on the Hi-Fi sound track.

	• Power on the TV
1	Open “SETUP MENU”
	Press the SETUP button.
2	Select “Set Timer Recording”
	Using the up/down, move the selection arrow to “Set Timer
	Recording,” then push right to select.
3	Select Event Number
	Move the selection arrow to any available event number (01-16),
	then push right to select.
4	Set Event Date and Time
	Use the number or up/down buttons to set the date and time of the
	event. To leave an entry unchanged, push the right button.
	The player will not allow you to enter an invalid number. The
	default setting is the current date and time.
	•	Set Month – Enter the month as a 2-digit number; i.e. for
		January, press “01”.
	•	Set Day – Enter the day as a 2-digit number; i.e. for the ninth,
		press “09”.
	•	Set Hour –Enter the hour as a 2-digit number; i.e. for 12:00,
		press “12”.
	•	Set Minute –Enter the minute as a 2-digit number; i.e. for 00:25,
		press “25”.
	• Set AM/PM – Enter 1 for AM and 2 for PM.
5	Set Event Length
	Use the number buttons to set the length of the event in hours and
	minutes. The default setting is 0 hours and 30 minutes.
	•	Set Length (H) - Enter the hours as a 1-digit number; i.e. for 1
		hour, press “1”.
	•	Set Length (M) - Enter the minutes as a 2-digit number; i.e. for 30
		minutes, press “30”.