Samsung DVD-V8000 instruction manual Tracking Auto Play/Rewind, VHS Playback

01616A DVD-V8000/TWN-Eng3 8/27/56 8:58 AM Page 46

Tracking

Auto Play/Rewind

GB

1 1

2

The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks. The ATR button (Auto Tracking) will automatically align the recorded tracks with the playback heads to solve this problem. You may also set tracking manually.

1Adjust Tracking Manually

During playback, press the TRK- or TRK + buttons to move the white lines out of the picture.

2Resume Auto Tracking

Press the ATR button to have the VCR adjust tracking automatically.

GB

If you want your videotapes to play automatically when you insert them, turn on Auto Play. If you want videotapes to rewind automatically when they are done playing, turn on Auto Rewind.

NOTE: Only tapes that are missing the Record Safety Tab will play automatically when inserted.

1Open the “SETUP MENU”

Press the SETUP button.

2Select “VCR & Channel Setup”

Using the up/down, move the selection arrow to “VCR & Channel Setup,” then push right to select.

3Select “Auto Play/Rewind”

Move the selection arrow to “Auto Play/Rewind,” then push right to select from the following options:

•Both - Enables both Auto Play and Auto Rewind.

•Play - Enables Auto Play only. Tapes without Record Safety Tabs will play automatically when you insert them.

•Rew - Enables Auto Rewind only. Tapes will rewind automatically when they are done playing.

•None - Disables both Auto Play and Auto Rewind.

S-VHS Playback

The DVD-VCR allows you to playback high quality S-VHS tapes.

1 Insert a S-VHS Tape

Insert an S-VHS tape into the VCR deck.

2 Start Playback

Press Play/Pause on the remote control to begin playback of the

S-VHS tape.

46 47