01616A
Using the TV Buttons on the Remote Control
Technical Specifications
GB
1
3
2
3
4
5
4
6
Your VCR remote control will work with Samsung televisions and compatible brands.
To determine whether your television is compatible, follow the instructions below.
1Switch your television on.
2Point the remote control towards the television.
3Hold down the TV button and enter the
Brand | Codes | Brand | Codes |
SAMSUNG | 01, 14, 15, 23 | LOEWE | 28 |
SHARP | 02, 16, 22 | ZENITH | 17 |
SONY | 03 | LG | 06, 08, 18 |
RCA | 07, 29 | MAGNAVOX | 04 |
TOSHIBA | 09 | EMERSON | 21 |
PANASONIC | 12 | SANYO | 05, 20 |
JVC | 11 | DAEWOO | 19 |
HITACHI | 10 | NOBLEX | 25 |
MITSUBISHI | 13 | TELEFUNKEN 26 | |
NEWSAN | 27 |
|
|
Result: If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control.
➢If several codes are indicated for your television brand, try each one in turn until you find one that works.
☛When you change the batteries in the remote control, you must reprogram the code, following the same procedure.
You can then control the television using the following buttons.
Button |
|
| Function |
POWER ➀ |
| Used to switch the television on and off. | |
INPUT | ➁ |
| Used to select an external source. |
VOL + or – ➂ | Used to adjust the volume of the television. | ||
CH ( | or | ) ➃ | Used to select the required channel. |
PREV.CH | ➄ | Used to jump directly to the previously viewed | |
|
|
| channel. |
MUTE ➅ |
| Used to toggle the sound on and off. |
➢The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.
GB
|
|
|
|
| AUDIO | 2 Stereo audio inputs, RCA Connector, |
|
|
| front and rear |
|
Inputs | VIDEO | 2 Composite video inputs, RCA Connector, 75Ω, |
|
| RF | Antenna or CATV Input, |
|
| AUDIO | 2 Stereo audio outputs, RCA Connector, |
|
| AUDIO (DVD only) | 2 Digital audio outputs, 1 optical, 1 coaxial |
|
| VIDEO | 1 Composite video output, RCA Connector, 75Ω, |
|
Outputs | VIDEO (DVD only) | 1 |
|
|
|
| |
|
| 1 Component video output, 75Ω, |
|
|
|
|
|
| RF | Channel 3 or 4 |
|
| VIDEO SYSTEM |
| |
|
| FM azimuth luminance;chrominance: converted sub system |
|
|
| phase shift |
|
| AUDIO TRACK | Normal: 1 track; |
|
| PLAY/RECORD TIME |
|
|
VCR | FF/REW TIME |
|
|
| HEADS | Video: DA 4 rotary Duraheads™ |
|
|
| Audio: 2 rotary heads |
|
|
| Control:1 stationary head |
|
|
| Erase: 1 full track, 1 audio track |
|
| WOW & FLUTTER | Less than 0.005% |
|
| FREQ. RESPONSE |
|
|
| DISC COMPATIBILITY | CD, |
|
|
|
| |
|
| files on |
|
DVD | FREQ. RESPONSE | 96/48 kHz Sampling: 4 |
|
| S/N RATIO | 110 dB |
|
| DYNAMIC RANGE | 96 dB |
|
| THD | 0.003 % |
|
| POWER REQUIREMENT | 100~240V AC, 50~60 Hz, 29 watts |
|
SYSTEM | CLOCK BACKUP TIME | 6 hours |
|
ENVIRONMENT |
|
| |
|
| ||
| WEIGHT | 21.5 lbs. |
|
|
|
|
|
68
69