Samsung DVD-V8000 Return to Video/Component Video Connections for DVD, Select Return to

01616A DVD-V8000/TWN-Eng5 8/27/56 8:59 AM Page 62

Return to 0:00:00

S-Video/Component Video Connections (for DVD)

GB

You can advance your videotapes to tape counter position 0:00:00 at the touch of a button. Remember that pressing the Clear button resets the tape counter position to 0:00:00.

1Open “Search Menu”

From Stop mode, press the SEARCH button.

2Select “Return to 0:00:00”

Using the up/down, move the selection arrow to “Return to 0:00:00,” then push right to select.

•The tape will rewind or fast-forward to tape counter position 0:00:00.

1

You can ONLY watch the DVD player through the S-Video or Component Video connection method. The tuner and VCR will still be viewed through the RF or line inputs.

You must follow the “Alt Video Out” instructions on page 68 to activate your alternative video selection.

You can choose EITHER S-Video OR Component, but NOT both. If your television is equipped with S-Video or Component Video inputs, you can enjoy superior video quality when watching DVDs with your DVD-VCR.

1 Connect S-Video Out to TV

Connect an S-Video cable from the S-Video Out on the back panel of the DVD-VCR to the S-Video Input on your television.

OR

Connect Component Video Out to TV

Connect a component video cable from the Component Video Out (Y, Pb Pr) on the back panel of the DVD-VCR to the Component Video Input on your television.

2Connect Audio Out

Connect RCA audio/video cables from the Left/Right Line Out jacks on the back panel of the DVD/VCR to the Left/Right Audio Line In jacks on your television.

•You must use these Line Out jacks when connecting the DVD- VCR to your TV with the S-Video or Component Video Output.

•Please continue on the next page with “Alt Video Out Setting” to activate your connection.

GB

1

To S-Video Input on Your TV

1

To Component Video Input

on Your TV

2

To Left/Right Audio Inputs

on Your TV

62

63