Front Panel Display Basic Connections | Samsung DVD-V8000 instruction

01616A DVD-V8000/TWN-Eng1 8/27/56 8:56 AM Page 10

Front Panel Display

Basic Connections

12 13

14 15

1The DVD Deck is active

2A DVD, CD, VCD, or SVCD is loaded

3A disc with LPCM (Linear Pulse Code Modulation) audio is loaded

4A DVD with a DTS soundtrack is loaded

5The time, counter position, time remaining, or current deck status is displayed

6The current TV show or video is broadcast in Stereo

7The Hi-Fi track of a VHS tape is playing

8A Timer Recording is programmed or in progress. If blinking there is an error. Also displays without the clock hands to indicate that a recording is in progress, and blinks when the VCR is in Pause mode.

9The VCR Record Speed is set to SP or SLP

10The VCR Deck is active

11The status of the DVD deck is graphically displayed

123D Sound is active

13The DVD has multiple angles to choose from

14A CD with MP3 tracks is playing

15The number to the right of the “T” symbol is the current title number

16The number to the right of the “C” symbol is the current chapter number

17The current time is a.m. or p.m.

18DVD to VHS copy is in progress

19The status of the VCR deck is graphically displayed

NOTES:

•Advanced Connections are covered in Appendix A.

•Even if you plan to use the S-Video or Component Video Outputs, you MUST connect the DVD-VCR to your

television with either the standard RF or the Line Out connection. This enables you to operate the DVD-VCR setup menus.

1Connect Antenna/Cable to DVD-VCR

Connect the RF antenna cable from your indoor/outdoor antenna or cable wall outlet to the IN (FROM ANT.) jack on the back panel of the DVD-VCR.

2Connect DVD-VCR to TV

Choose one of the following methods to connect the DVD-VCR to your TV:

RF Connection

Connect the supplied RF antenna cable from the OUT (TO TV) jack on the back panel of the DVD-VCR to your television’s Antenna Input.

Line Connection

Connect an RCA-type audio/video cable (red, white, yellow) from the LINE OUTjacks on the back panel of the DVD–VCR to your television’s Line In jacks. Use red for right audio, white for left audio, and yellow for video.

NOTE: It is recommended that you use the Line Connection if your TV is equipped with RCA jacks.

3Set DVD-VCR Output Channel

If you used the RF connection in Step 2, set the Channel switch on the back panel of the DVD-VCR to 3 or 4, whichever is not an active channel in your area.

4Plug In DVD-VCR

Connect the DVD-VCR power cord to a standard 100~240V/ 50~60Hz wall outlet.

5Turn On DVD-VCR

Press the POWER button on the remote control or on the DVD–VCR’s front panel.

6Turn On TV

Press the POWER button on your TV.

7Set TV to Channel 3 or 4 or Line

Be sure to use the same channel you selected in Step 3. If you used the Line Connection, set your TV to its Line Input. The “LANGUAGE/LANGUE/IDIOMA” menu should appear on the screen.

From Antenna or Cable

To TV’s Antenna Input

10	11