Samsung HP-P5091 Auto PROG. button, ± ADD/DEL button, ≠ DNIe button, Sleep button, SET button

◊ AUTO PROG. button

Automatically cycles through all of the available channels and stores them in memory.

±ADD/DEL button

Adds or deletes channels in the TV’s memory.

≠DNIe button

Activates DNIe (Digital Natural Image engine).

– SLEEP button

Selects a preset time interval for automatic shutoff.

— SET button

Sets up the Samsung remote control to work with other devices (VCR, Cable Box and DVD).

Refer to page 46.

÷ S.MODE button

Selects the sound mode.

® P.MODE button

Adjust the PDP picture by selecting one of the preset factory settings (or select your personal, customized picture settings.)

∑CAPTION button

Controls the caption decoder.

µVCR, DVD control buttons

Controls VCR tape or DVD disc functions: Stop, Rewind,

Play/Pause, and Fast Forward.

¥RESET button

If your remote control is not functioning properly,

take out the batteries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again.

Installing the Batteries in Your Remote Control

1 Slide the back cover to open the battery compartment of the remote control.

2 Install two AAA size batteries. Make sure to match the “+” and “-” ends of the batteries with the diagram inside the compartment.

3Slide the cover back into place.

Remote Control Operation Range.

You can use your remote control within a distance of 23 feet and an angle of 30 degrees from the left and right sides of the PDP’s remote control receiver.

12