How to assemble and attach the Stand-Base
This guide is for the SMN5040 stand.
1 Firmly secure the pegs to the both sides of the stand base using 8 screws provided.
Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor to the
2 stand pegs. (The exterior of the set may be different than the picture.)
Warning
Firmly secure the stand for the PDP before moving it, as the stand may fall and could cause serious injury.
3 For your convenience, the angle of the PDP may be adjusted up to 20° left/right.
Note
• Stand is sold seperately. Check with your dealer.
28