Samsung HP-P5091 manual Pdp

Page 79

PDP (Continued)

Problem

Possible Solution

If the message “No Wireless Signal

Check whether the WIRELESS HOME AV CENTER’s Power

or Please Check WIRELESS HOME

is turned ON. Check whether the Wireless LED on the

AV CENTER Power” appears:

front panel is lit Green (If not, move the WIRELESS HOME

This message is displayed when the

AV CENTER to a location where the Green LED lights up).

communication between the PDP and

 

the WIRELESS HOME AV CENTER

 

fails.

 

 

 

PDP set is turned on and the message

 

“No Wireless Signal or Please Check

 

WIRELESS HOME AV CENTER

 

Power” appears.

 

Cause 1: The WIRELESS HOME AV

Solution 1: Turn on the PDP set and then turn on the AV

CENTER is turned off.

Center as they have separate power supplies.

Cause 2: The message still appears

Solution 2: Check if AV Receiver’s LED at the top of PDP

despite the AV Center is on.

set and the AV Center’s wireless LED are ON and green.

 

If both are OFF, change both devices’ positions so that

 

they face each other for better communication. If the

 

message appears again, turn both PDP and AV Center

 

OFF and then turn them back ON. If the problem persists,

 

contact the nearest service center.

 

 

The picture continuously breaks up

 

and the message “No Wireless

 

Signal or Please Check WIRELESS

 

HOME AV CENTER Power” appears.

 

Cause: The product utilizes 5GHz

Solution: During watching, another wireless device that

band for wireless signal transmission.

uses a single fixed frequency of the same band may

Other wireless devices may cause

interfere and cause this problem. In this case, turn the

picture noise or communication

PDP and AV Center off and then back on. The WIRELESS

errors. These problems may be

HOME AV CENTER has the function of frequency search

caused by Wireless PC networks or

in the 5GHz band for clear data communication to avoid

wireless TV sets using the same band.

signal interference.

 

 

The message “Please check

 

resolution, AV Center can’t support

 

720p/1080i component signal.”

 

appears in the Component Mode.

 

Cause: AV Center only handles of

Solution: Switch the input source to 480i or 480p.

480i and 480p input. 720p and

 

1080i input cannot be processed.

 

 

 

79

Page 78 Page 80
Image 79
Page 78 Page 80
Contents With Wireless Home AV Center To Ensure Optimum Wireless Conditions User Instructions Table of Contents General Information ¨ CH , buttons ´ Menu button ∏ Power buttonSource button VOL+, buttonsEXT Speaker 8Ω Rear PanelWireless AV Receiver Dtvled ´ Wireless LEDInfo AV1, AV2 Audio L/R AIR 75Ω´ Cable 75Ω VideoRemote Control Buttons ± ADD/DEL button ¥ Reset buttonRemote Control Operation Range Auto PROG. buttonConnections Connecting the PDP to the Wireless Home AV Center Antennas with 75-ohm Round Leads Connecting VHF and UHF AntennasCable without a Cable Box Connecting Cable TVVideotape Playback Connecting a VCRViewing camcorder tapes Connecting a CamcorderViewing Tapes To Play DVD Playing DVDTo Watch DTV Watching DTVConnecting a Digital Audio System Connecting to a second TV Connecting Speakers Speaker Cable Installing the SpeakersParts Speakers Speaker Dust CoverBlack How to Attach the Speakers when using the Wall Mount Black How to assemble and attach the Stand-Base Support Bars Screws Wall Installation InstructionsInstallation Notes Wall Mount BracketHow to assemble the Wall Mount Bracket Fixing the PDP panel to the wall attachment panel bracket Change Angle How to Adjust Mounting AngleFactory default Connecting External Devices to the PDPOperation Displaying Status Information Turning the PDP On and OffViewing the Menus and Displays Viewing the MenusMemorizing the Channels Selecting the Video Signal-sourceSTD HRC IRC Storing Channels in Memory Automatic MethodMono Adding and Deleting Channels Manual MethodUsing the FAV. CH button Using the Channel ButtonsDirectly Accessing Channels Using the PRE-CH button to select the previous channelUsing the Mute Button Adjusting the VolumeUsing Mute Using the Volume ButtonsTo turn the on-screen help off Using the On-Screen HelpSetting your Favorite Channels Fine Tuning Channels Setting the Date and Time Checking the Digital-Signal Reception Setting Up your Remote Control VCR Codes Remote Control CodesPicture Control Customizing the Picture Using Automatic Picture Settings Selecting the Color Tone DNIe Digital Natural Image engine Changing the Picture Size Zoom2 WideNormal Zoom1Page Sound Control Using an Automatic Sound Settings Choosing a Digital Sound Format Dolby Digital or PCM Choosing a Multi-Track Language Choosing a Multi-Track Sound MTS Soundtrack Adjusting the Sound Settings Setting the TruSurround XT Using the Dynamic Range Compression DRC Function Description Selecting the Fan Viewing Closed Captions How to Activate or Deactivate the On-screen Captions Setting Up Digital CaptionsCaption Options Size Default Style Foreground Color Setting Up Your Personal ID Number PIN Using the V-ChipHow to Enable/Disable the V-Chip How to Set up Restrictions using the TV Parental Guidelines Allow All Block All Move Enter Return Change PIN Enter your PIN number Viewing the Electronic Program Guide EPG Electronic Program GuideViewing the Information about Channels Viewing the Information about One ChannelPage Appendix Problem Possible Solution TroubleshootingPDP PDP Cabinet Care and MaintenanceTemperature LiquidsGeneral SpecificationsMemo BN68-00629A-00
Related manuals
Manual 12 pages 21.19 Kb
Top Page Image Contents