
Checking the Digital-Signal Reception
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have perfect reception or you will not receive them at all. In this case, you cannot fine tune a digital channel. But you can adjust your antenna to improve the reception of available digital channels.
1 Press the MENU button on the remote control.
TV | Guide | |
| Mini Guide | √ |
| Full Guide | √ |
| Remind List | √ |
| Default Guide | : Mini Guide √ |
Move
Enter
Exit
Use the ▲ or ▼ button to select “Channel”, then
2 press the ENTER button.
TVChannel
Select Antenna | : Air |
|
Auto Program |
| √ |
Add/Delete |
| √ |
Fine Tune |
| √ |
Signal Strength |
| √ |
Move | Enter | Return |
Press the ▲ or ▼ button to select “Signal Strength”,
3 then press the ENTER button. The “Signal Strength” meter will be displayed.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.
When you have finished adjusting your antenna,
4 use the MENU button to exit.
TV | Signal Strength |
Return
Note
•“No Signal” may appear on the screen depending on the broadcast station conditions, even if an incoming broadcast signal exists.
44