Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center.
WIRELESS HOME AV CENTER
Problem | Possible Solution |
Poor picture quality | Try another channel. |
| Adjust the antenna. |
| Check all wire connections. |
|
|
Poor sound quality or no sound. | Try another channel. |
| Adjust the antenna. |
| Make sure the “MUTE” button is off. |
|
|
No picture or sound. | Try another channel. |
| Make sure the |
| Check the antenna connections. |
|
|
No color or wrong colors. | Make sure the program is broadcasted in color. |
|
|
Remote control failure. | Press the STB button to enter the DTV mode. |
| Check for batteries. |
|
|
A/V Center won’t turn on. | Make sure the wall outlet is working. |
| Make sure the remote has batteries. |
| Check if the power plug is connected. |
|
|
No output from the TV OUT | No Video output from the external input source is available |
| on this terminal. Available input sources are AIR and CABLE. |
| Audio output for all input sources is available. |
|
|
Video and audio breakups | This product adopts 5GHz wireless LAN technology. |
| Since wave length of signal is very short, signal cannot |
| go through concrete wall. This causes video and audio |
| breakups. For a better reception, PDP needs a line of |
| sight to the WIRELESS HOME AV CENTER. |
|
|
PDP
Problem | Possible Solution |
Poor picture. | Check all wire connections. |
|
|
Your remote control does not | Press the “MODE” button to put your remote control in |
operate the PDP. | the “TV” mode. |
|
|
The PDP won’t turn on. | Check if the power plug is connected. |
|
|
There is no screen image. | Check to see that both the PDP and the source are |
| plugged in and turned on. |
|
|
The image is too light or too dark. | Adjust the Brightness or Contrast settings. |
|
|
The image is too large or too small. | Adjust the Size settings. |
|
|
78