¦Setting Up Anynet+
TPress the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools → Anynet+
❑Setup
Anynet+ (HDMI-CEC) → Off / On
To use the Anynet+ Function, Anynet+
N When the Anynet+
Auto Turn Off → No / Yes
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
N The active source on the TV remote must be set to TV to use the Anynet+ function.
N If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.
Application
Anynet+ | ► |
Media play (USB)
Device List
Setup
UMove EEnter RReturn
: | On | |
Auto Turn Off | : | Yes |
|
|
|
UMove EEnter RReturn
¦Switching between Anynet+ Devices
1.Press the TOOLS button. Press the ENTEREbutton to select Anynet+
2.Press the ▲ or ▼ button to select Device List, then press the ENTEREbutton. N Anynet+ devices connected to the TV are listed.
N If you cannot find a device you want, press the red button to scan for devices.
3.Press the ▲ or ▼ button to select a particular device and press the ENTEREbutton. It is switched to the selected device.
NOnly when you set Anynet+
NSwitching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
View TV
Device List
Record: DVDR
DVDR Menu
DVDR Operation
Setup
UMove EEnter RReturn
NThe time required to scan for devices is determined by the number of connected devices. N When the device scan is complete, the number of devices found are not displayed.
N Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for the connected device.
N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.