5
Commands
Activating Component Commands – Simple, Easy, Intuitive
Light Button
6
LIGHT
Activating Component
STARTED
Once you’ve programmed RF20 for your Components, all you have to do to operate a specific Component is first, press the MAIN button. This will display Page 1 of the MAIN menu on the LCD screen. Page 1 of the MAIN menu displays five Components. Then, simply select the Component you want to operate by pressing the corresponding Screen- Labeled Component Display Button on the right side of the LCD Screen. As an example, if you press the TV Display Button, the display label at the top of the screen will change from MAIN to TV, and all the but- tons on RF20 will work your TV. To operate another Component, simply press the MAIN button again to return to Page 1 of the MAIN menu and select the next Component you want to operate.
If you don’t see the Component you want to control on Page 1 of the MAIN menu, just use the PAGE (
) (
) buttons on the left side of the screen to bring up Page 2 of the MAIN menu which displays an additional five Components.
Each Component is provided with five pages of 
) (
) buttons to take you to the next command page, or return you to the previous command page.
The fully backlit keypad makes the RF20 easy to use in the dark or dim lighting conditions. Simply press the LIGHT button to backlight all the keypad buttons and LCD screen.
To turn off the backlight, press the LIGHT button again, or just wait ten seconds (the backlight automatically shuts itself off). Lights out!
Try it out!
LIGHT
BUTTON
BUTTON
GETTING
GETTING
TV DEVICE
BUTTON
MAIN
BUTTON
STARTED