Toshiba 52HMX94 To view antenna or Cable channels, To record a TV program while watching a DVD

Chapter 2: Connecting your TV

Connecting a DVD player with ColorStream® (component video) and a VCR

Your TV has ColorStream® (component video) inputs. Connecting a DVD player with component video output (such as a Toshiba DVD player with ColorStream®) can greatly enhance picture quality.

You will need:

￿ two coaxial cables

￿ two sets of standard A/V cables

• For better picture performance, if your VCR has S-video, use an

From antenna or Cable

Stereo VCR

	VIDEO
IN from ANT
CH 3	IN
CH 4
OUT to TV	OUT

S-video cable (plus the audio cables) instead of the standard

video cable. However, do not connect both types of video cable to

VIDEO 1 (or VIDEO 2) at the same time or the picture

performance will be unacceptable.

• If you have a mono VCR, connect L/MONO on the TV

(VIDEO 1) to your VCR’s audio out jack using the white audio

cable only.

￿ one pair of standard audio cables

￿ one set of component video cables

• You can connect the component video cables (plus audio

cables) from the DVD player to either set of ColorStream

jacks on the TV (HD-1 or HD-2). The ColorStream HD-1 and

HD-2 jacks can be used with Progressive (480p, 720p) and

Interlaced (480i, 1080i) scan systems. A 1080i signal will

provide the best picture performance.

• If your DVD player does not have component video, see

page 16. If your DVD player has HDMI video, see page 19.

TV

OUT 1	S-VIDEO	S-VIDEO
				Y
OUT 2				PB
TheaterNet
				PR
	L/	L/
			AUDIO	AUDIO
		AUDIO
		R	R
	VIDEO 1	VIDEO 2	COLOR	COLOR
			STREAM	STREAM
			HD-1	HD-2
			IN
	Y	PB	PR
S-VIDEO	COMPONENT VIDEO			VIDEO
OUT				OUT

			TheaterNet	CableCARD™
			IEEE1394
				EJECT
		ANT1	1
IN		(CABLE)
			2
AUDIO
R	L		HDMI IN
2			2
		ANT2

1	ANT (75 )
	1
VIDEO
L/
MONO
AUDIO	G-LINK
R	R
OUT	DIGITAL

AUDIO OUT

AUDIO

OUT

L

R

￿To view antenna or Cable channels:

Turn OFF the VCR. Select the ANT 1 video input source on the TV.*

￿To view the DVD player:

Turn ON the DVD player. Select the ColorStream HD-1 video input source on the TV.*

￿To view the VCR:

Turn ON the VCR. Select the VIDEO 1 video input source on the TV.*

or…Turn ON the VCR. Select the ANT 1 video input source.* Tune the TV to channel 3 or 4 (whichever channel is vacant in your area).

￿To record a TV program while watching a DVD:

Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream HD-1 video input source on the TV* to view the DVD.

_____________

*To select the video input source, press INPUT on the remote control (see page 66). To program the TV remote control to operate other devices, see Chapter 3.

DVD player with component video

Note: The VIDEO/AUDIO OUT jacks output the signals from the ANT 1, ANT 2, VIDEO 1, VIDEO 2, or VIDEO 3 jacks when the appropriate input mode is selected.

￿To use the TV Guide On Screen recording features:

1.Connect the G-LINK cable according to the instructions on page 25.

2.Make sure the VCR is connected to the A/V OUT jacks on the TV (see illustration).

3.Set the VCR to the appropriate line input (refer to your VCR owner’s manual for details), and then turn OFF the VCR.

4.See Chapter 5 for details on setting up the TV Guide On Screen system.

5.See Chapter 7 for details on using the TV Guide On Screen system.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.	17
HMX94(E)012-25(2B-Cnct)	17	9/28/04, 1:34 PM

(E) 46/52/62HM94