Toshiba 52HMX84, 62HMX84 owner manual Connecting a cable converter box and VCR

Page 10

Connecting your TV

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while watching another channel. To watch basic cable and use the TV’s features, select ANT-1.

To view premium channels or record with the VCR, select ANT-2, tune the TV and VCR to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

•four coaxial cables

•one set of standard A/V cables

From Cable

TV

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S-video cable (in the S-video jacks) instead of a standard video cable. Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

OUT IN

			IN	Cable converter box
				Cable converter box
IN from ANT OUT to TV
CH 3			OUT
CH 3
CH 4	VIDEO	L	R
			AUDIO

Stereo VCR

10

Image 10

Contents Dlptm Projection Television IndexLamp Unit Replacement Dear CustomerImportant Safety Instructions InstallationService CareImportant notes about your DLP projection TV Important Safety Information Introduction Welcome to Toshiba Introduction Connecting YourTV ControlIntroduction Exploring your new TVConnecting an antenna or cable TV Connecting your TVConnecting your TV Using Connecting a VCRConnecting a cable converter box You will need Three coaxial cablesConnecting a cable converter box and VCR Connecting a DVD player or satellite receiver and a VCR From Antenna Stereo VCR From DTV Antenna Connecting two VCRs Connecting a camcorderOne Hdmi cable type a connector Connecting an Hdmi or a DVI device to the Hdmi inputsOne pair of standard analog audio cables Connecting an audio system Preparing the remote control for use Using the remote controlInstalling the remote control batteries Using the Remote Control Remote Control functional key chartCBL/SAT Audio VCR TV/VCR TV/SAT Device code setup Searching and sampling the code of a deviceIntroduction Connecting YourTVUsingthe RemoteControl Setting up your TV Features Appendix IndexVCR setup codes Device code tableCD Player setup codes Learning about the remote control Settingup yourTV Setting up your TVIntroduction Connecting YourTV Usingthe RemoteControl UsingtheTV’s FeaturesChanging the on-screen display language Selecting the antenna inputProgramming channels automatically Introduction Connecting YourTVAdding channels to the TV’s memory To program channels automaticallyAdding and erasing channels manually Changing channelsSelecting the Quick Restart EnterAdjusting the channel settings Using the TV’s featuresIntroduction Connecting YourTV Usingthe Control Favorite CH Using the TV’s FeaturesPress y or z to highlight Press Enter to display the Favorite CH menuPress z or y to highlight UsingtheTV’s Features AppendixLabeling channels ClearSelecting the picture size Natural picture sizeUsingthe RemoteControl Setting yourTo raise the picture, press y Press Enter to display the Scroll Adjustment modeScrolling the TheaterWide picture TheaterWide 2 and 3 only To lower the picture, press zPress y or z to highlight Auto ASPECT, and then press Using the Auto Aspect featureUsingthe RemoteControl Settingup YourTV Press y or z to select ON, and then press EnterUsing the POP double-window feature To close the POP window Press Split again or ExitSwitching the speaker audio main or POP Switching the main and POP picturesUp TV Using the programmed channel search function Double-Window aspect ratioUsing the favorite channel search function About the auto favorite featureEntering the PIN code Using the Locks menuUsing the V-CHIP menu If you cannot remember your PIN codeTV Rating Independent rating system for broadcasters Enable BlockingOFF To release your setting Unlock Press z or y to select an itemMpaa Rating Independent rating system for movies Mpaa RatingUnlocking programs temporarily Locking channelsRepeat steps 2 and 3 for other channels Press y or z to highlight Clear ALL, and then press Enter OFF Locking the video inputsChanging the PIN code From the Locks menu, press y or z to highlight NEW PIN CodeSelecting the picture mode Adjusting the pictureAdjusting the picture quality Press x or to select the mode you prefer Selecting the color temperatureSaving your new preferences Reset Using the CableClear DNR featureResetting picture adjustments DoneSelecting the cinema mode Selecting the Lamp modeConnecting YourTV Control Cinema ModeSelecting the video input source Press y or z to highlight Caption or TEXT, and then press Using the closed caption featureTo view text, highlight T1, T2, T3, or T4 Setting the on timer Setting the sleep timerTo display the time on-screen Press Recall Muting the sound Adjusting the soundSelecting stereo/SAP broadcasts Adjusting the sound quality Using the WOW surround sound featureUsing Remote Settingup YourTV UsingtheTV’s Features Appendix IndexEnjoying the Dolby Virtual sound feature Using the StableSound feature Resetting your audio adjustmentsTo turn off the StableSound feature Select OFF in above To turn on the built-in speakers Turning off the built-in speakersSelecting the Audio OUT sound Select on in aboveSelecting the background of the menu display Understanding the auto power off featureUnderstanding the last mode memory feature Displaying on-screen informationWhen to replace the lamp unit Appendix Lamp unit replacement User-replaceable componentU.S How to replace the lamp unit Temperature of the lamp immediatelyCleaning the lamp unit glass Replace the thumb screw and hand-tighten LED indications Lamp unit disposalSpecifications VIDEO/AUDIO InputTroubleshooting Limited United States Warranty Limited Canada Warranty Index Audio OUT sound, selectingPage Page Manufactured by