Toshiba 52HMX84, 62HMX84 owner manual Cleaning the lamp unit glass

Page 62

How to replace the lamp unit (continued)

5. Grasp the lamp unit handle and gently pull the lamp unit straight out of the TV. Set the old lamp unit aside (see “Lamp unit disposal” on page 64).

Wear gloves when replacing the lamp unit.

6. Carefully insert the new lamp unit straight into the TV until it is fully seated.

Appendix

Note :

•Never subject the lamp unit to excessive shock.

•Never touch the lamp unit glass or otherwise get it dirty.

Doing so may affect the image quality and reduce the service life of the lamp. See “Cleaning the lamp unit glass” at right.

7. Using a manual Phillips screwdriver, tighten the two lamp unit screws.

Note: Hand-tighten only. Do not use an electric screwdriver.

Lamp unit screws (use manual Phillips screwdriver only)

NOTE : Make sure the lamp unit and screws are installed securely; otherwise, the TV may not turn on

and the lamp life may be shortened.

(Continued on next page)

Cleaning the lamp unit glass

If you accidentally touch the lamp unit glass or otherwise get it dirty, wipe it with a lint-free lens cleaning cloth (such as a cloth for cleaning camera lenses or eyeglasses).

CAUTION: NEVER clean

a hot lamp with any type of flammable liquid or aerosol cleaning agent. Many ordinary cleaning agents (such as glass cleaners) contain chemicals that may be flammable at certain temperatures. If the lamp unit is not allowed to cool for at least one (1) hour, such chemicals may ignite.

62

Image 62

Contents Dlptm Projection Television IndexLamp Unit Replacement Dear CustomerImportant Safety Instructions InstallationService CareImportant notes about your DLP projection TV Important Safety Information Introduction Welcome to Toshiba Introduction Connecting YourTV ControlIntroduction Exploring your new TVConnecting your TV Connecting your TVConnecting an antenna or cable TV Using Connecting a VCRConnecting a cable converter box You will need Three coaxial cablesConnecting a cable converter box and VCR Connecting a DVD player or satellite receiver and a VCR From Antenna Stereo VCR From DTV Antenna Connecting two VCRs Connecting a camcorderOne pair of standard analog audio cables Connecting an Hdmi or a DVI device to the Hdmi inputsOne Hdmi cable type a connector Connecting an audio system Installing the remote control batteries Using the remote controlPreparing the remote control for use Using the Remote Control Remote Control functional key chartCBL/SAT Audio VCR TV/VCR TV/SAT Device code setup Searching and sampling the code of a deviceIntroduction Connecting YourTVUsingthe RemoteControl Setting up your TV Features Appendix IndexVCR setup codes Device code tableCD Player setup codes Learning about the remote control Settingup yourTV Setting up your TVIntroduction Connecting YourTV Usingthe RemoteControl UsingtheTV’s FeaturesChanging the on-screen display language Selecting the antenna inputProgramming channels automatically Introduction Connecting YourTVAdding channels to the TV’s memory To program channels automaticallyAdding and erasing channels manually Changing channelsSelecting the Quick Restart EnterIntroduction Connecting YourTV Usingthe Control Using the TV’s featuresAdjusting the channel settings Favorite CH Using the TV’s FeaturesPress y or z to highlight Press Enter to display the Favorite CH menuPress z or y to highlight UsingtheTV’s Features AppendixLabeling channels ClearSelecting the picture size Natural picture sizeUsingthe RemoteControl Setting yourTo raise the picture, press y Press Enter to display the Scroll Adjustment modeScrolling the TheaterWide picture TheaterWide 2 and 3 only To lower the picture, press zPress y or z to highlight Auto ASPECT, and then press Using the Auto Aspect featureUsingthe RemoteControl Settingup YourTV Press y or z to select ON, and then press EnterUsing the POP double-window feature To close the POP window Press Split again or ExitUp TV Switching the main and POP picturesSwitching the speaker audio main or POP Using the programmed channel search function Double-Window aspect ratioUsing the favorite channel search function About the auto favorite featureEntering the PIN code Using the Locks menuUsing the V-CHIP menu If you cannot remember your PIN codeTV Rating Independent rating system for broadcasters Enable BlockingOFF To release your setting Unlock Press z or y to select an itemMpaa Rating Independent rating system for movies Mpaa RatingRepeat steps 2 and 3 for other channels Locking channelsUnlocking programs temporarily Press y or z to highlight Clear ALL, and then press Enter OFF Locking the video inputsChanging the PIN code From the Locks menu, press y or z to highlight NEW PIN CodeAdjusting the picture quality Adjusting the pictureSelecting the picture mode Saving your new preferences Selecting the color temperaturePress x or to select the mode you prefer Reset Using the CableClear DNR featureResetting picture adjustments DoneSelecting the cinema mode Selecting the Lamp modeConnecting YourTV Control Cinema ModeSelecting the video input source To view text, highlight T1, T2, T3, or T4 Using the closed caption featurePress y or z to highlight Caption or TEXT, and then press Setting the on timer Setting the sleep timerTo display the time on-screen Press Recall Selecting stereo/SAP broadcasts Adjusting the soundMuting the sound Adjusting the sound quality Using the WOW surround sound featureUsing Remote Settingup YourTV UsingtheTV’s Features Appendix IndexEnjoying the Dolby Virtual sound feature To turn off the StableSound feature Select OFF in above Resetting your audio adjustmentsUsing the StableSound feature To turn on the built-in speakers Turning off the built-in speakersSelecting the Audio OUT sound Select on in aboveSelecting the background of the menu display Understanding the auto power off featureUnderstanding the last mode memory feature Displaying on-screen informationU.S Appendix Lamp unit replacement User-replaceable componentWhen to replace the lamp unit How to replace the lamp unit Temperature of the lamp immediatelyCleaning the lamp unit glass Replace the thumb screw and hand-tighten LED indications Lamp unit disposalSpecifications VIDEO/AUDIO InputTroubleshooting Limited United States Warranty Limited Canada Warranty Index Audio OUT sound, selectingPage Page Manufactured by