Toshiba P600DL service manual Disassembly, HOW to Replace the Lamp

Page 17

DISASSEMBLY

1.HOW TO REPLACE THE LAMP

1)turn off the power switch and disconnect AC cord.

2)Open lamp door.

(1)Remove 2 screws.

(2)Open Lamp door. Be careful, lamp door switch is located at door.

(2)

3)Remove Old lamp

(1)Rotate Lock lever down as picture shows.

(2)Pull the Lamp unit to the right and remove lamp.

②

①

Lock handle

Lamp unit

16

Image 17

Contents P600DL Safety Precaution Contents Safety Precautions for User For use of the equipment For servicing, maintenance and inspection Safety Precautions for User Request to User Precautions for USE and MaintenanceGeneral Descriptions Features Dimensions BNC Function of I/O PanelON/OFF Function of Power PanelPower Switch and Power Indicator Specifications Acceptable Signal Type Horizontal Timing Vertical Timing Acceptable RGB Input Signal TimingConnection AT a Multi Projection System Unit-4Unit-3HOW to Replace the Lamp DisassemblyDiassembly ．LOCATION of KEY Components and Function Module Power Supply Module Ballast Module Control ModuleExploded View of the Projection Block 96pin connector ．EXPLODED View of the Screen Block and Cabinet ．WIRING Adjustment ．ENGINE Mount Adjustment Adjustment Adjustment Adjustment Colour , Tint Multiple Screen Wall system example Electronic Circuit Explanation Electric Circuit Explanation Power on Power FAN LampStanby FAN StopAppendix-2 Cont VN2 ID.CLR DMD Driver Board Debug Page DMD Driver Board Debugging Flow DiagramBad image- Horizontal bands or lines Image shifted to left Parts List Location No Description 94800807 Ballast Module Assy 100W