Toshiba P600DL service manual Adjustment

Page 24

ADJUSTMENT

1. DLP Engine adjustment

When DLP Engine is replaced, most of occasion, following adjustments are needed. New DLP engine may have some position displacement. The engine mount base

has limited adjustment range so that optical engine need to be perfectly adjusted.

1) Adjust the engine mount to the proper positions

By rotating the screw ② and ④, obtain 10mm of clearance between base and adjusting platform.

2)Place the engine on the engine mount

Place the engine on the mount and connect all the connectors.

	３）Adjust lens focus	Focus Ring fastening knob
	(1) Loosen Focus Ring fastening screw knob and	Focus Ring fastening knob
	(1) Loosen Focus Ring fastening screw knob and
	rotate it to have the best focus.
	(2) After the adjustment, tighten the screw
	so that Focus ring will not move by vibration.

23

Image 24

Contents P600DL Safety Precaution Contents Safety Precautions for User For use of the equipment For servicing, maintenance and inspection Safety Precautions for User Precautions for USE and Maintenance Request to UserGeneral Descriptions Features Dimensions Function of I/O Panel BNCFunction of Power Panel Power Switch and Power IndicatorON/OFF Specifications Acceptable Signal Type Acceptable RGB Input Signal Timing Horizontal Timing Vertical TimingUnit-4Unit-3 Connection AT a Multi Projection SystemDisassembly HOW to Replace the LampDiassembly Power Supply Module Ballast Module Control Module ．LOCATION of KEY Components and Function ModuleExploded View of the Projection Block 96pin connector ．EXPLODED View of the Screen Block and Cabinet ．WIRING Adjustment ．ENGINE Mount Adjustment Adjustment Adjustment Adjustment Colour , Tint Multiple Screen Wall system example Electronic Circuit Explanation Electric Circuit Explanation Power FAN Lamp Power onStanby FAN StopAppendix-2 Cont VN2 ID.CLR DMD Driver Board Debug Page Debugging Flow Diagram DMD Driver BoardBad image- Horizontal bands or lines Image shifted to left Parts List Location No Description 94800807 Ballast Module Assy 100W