Toshiba P600DL service manual 96pin connector

Page 21

DIASSEMBLY

5-1. How to remove the DLP Engine

1)Remove 96-pin connector from the DLP engine.

2)Remove clock connector from the engine.

3)Remove ballast connector from engine.

4)Remove 2 screws of lamp power connector from engine.

5)Remove 5 screws which are used to tighten engine block and remove engine.

5-2. How to install the DLP Engine

1)Place the engine at the right place, locating guide pins to the location holes.

2)Tighten 5 screws so that engine will be securely attached.

3)By using 2 screws, the lamp connecter could be fixed.

4)Connect ballast connector to the engine.

5)Connect the clock connector to the engine.

6)Attach 96-pin connector to the engine, placing correct direction/position of it.

	96pin connector
Clock connector	Ballast connector
	Lamp power connector

Guide pins (at the bottom of the engine)

20

Image 21

Contents P600DL Safety Precaution Contents Safety Precautions for User For use of the equipment For servicing, maintenance and inspection Safety Precautions for User Request to User Precautions for USE and MaintenanceGeneral Descriptions Features Dimensions BNC Function of I/O PanelFunction of Power Panel Power Switch and Power IndicatorON/OFF Specifications Acceptable Signal Type Horizontal Timing Vertical Timing Acceptable RGB Input Signal TimingConnection AT a Multi Projection System Unit-4Unit-3HOW to Replace the Lamp DisassemblyDiassembly ．LOCATION of KEY Components and Function Module Power Supply Module Ballast Module Control ModuleExploded View of the Projection Block 96pin connector ．EXPLODED View of the Screen Block and Cabinet ．WIRING Adjustment ．ENGINE Mount Adjustment Adjustment Adjustment Adjustment Colour , Tint Multiple Screen Wall system example Electronic Circuit Explanation Electric Circuit Explanation Power on Power FAN LampStanby FAN StopAppendix-2 Cont VN2 ID.CLR DMD Driver Board Debug Page DMD Driver Board Debugging Flow DiagramBad image- Horizontal bands or lines Image shifted to left Parts List Location No Description 94800807 Ballast Module Assy 100W