Using the Remote Control | 17 |
Installing the batteries
Install the batteries (AAAx2), matching the polarity indicated inside battery compartment of the remote control.
1 Slide the battery cover down.
(Sample Illustration) Remote control - Opening the battery cover
2 Insert two AAA batteries.
Make sure to match the polarity marks (+/ ) on the batteries to the marks indicated in the battery compartment.
(Sample Illustration) Remote control - inserting the batteries
3 Replace the battery cover.
Do not expose batteries to excessive heat such as sunshine, fire, etc.
Dispose of batteries in a designated disposal area.
Always consider the environment when disposing of batteries. Always follow applicable laws and regulations.
If the remote does not operate correctly, or if the operating range is reduced, replace the batteries.
Always replace both batteries with new ones. Never mix battery types or use new and used
batteries | together. |
|
|
Always | remove batteries from the remote if | they | are dead or if the remote control is not to |
be used for an extended period of time. |
|
| |
This prevents battery acid from leaking into | the | battery compartment. | |