Toshiba BDX5500KC manual Angle Mark, PIP Mark, Secondary Audio, Last Memory

	Customizing	35
Rated discs above the level you set in [Parental		Control] require a password to be entered.
The ratings are country dependent. To allow all		discs to play, select 'Off'.

Information Setting

1In the Setting menu, use the / button to select Information and press OK.

2The current Software Version, MAC Address and Netflix ESN will be displayed.

3Press the button or the BACK button to return to the previous menu.

Playback Setting

1In the Setting menu, use the /button to select Playback and press OK.

2Press the / button to select an option and press OK.

3Use the / button to select On/Off, and press OK to confirm.

4Press the button or the BACK button to return to the previous menu.

Angle Mark

Some Blu-rayTMdiscs/DVDs contain the scenes recorded with multiple angles, which allow you to enjoy the videos with your desired angles, therefore the angle mark is displayed only when the Blu- ray DiscTM/DVD disc is supportable for multi-angle and Angle Mark is set to ON.

On: Displays the Angle Mark.

Off: Hides the Angle Mark

PIP Mark

The Picture -In- Picture (PIP) mode display two pictures on the TV screen at the same time, the full screen picture is called Main Window and the small inset window is called Sub Window. The PIP Mark is displayed when in PIP mode and PIP Mark is set to ON.

On: Displays the PIP Mark.

Off: Hides the PIP Mark.

Secondary Audio

On: Displays the Secondary Audio.

Off: Hides the Secondary Audio.

Last Memory

If you open the disc tray or switch this Blu-ray DiscTM and online Media Player to standby state during normal playback, the player can memorize the end playing point, the player will start playback from the memorized point next time.

On: Enables Last Memory feature.

Off: Disables Last Memory feature.

Not all the Blu-rayTMdiscs can support this function.

Display Setting

These settings configure how the picture is displayed on the television or screen.

1In the Setting menu, use the / button to select Display and press OK.

2Press the / button to select an option and press OK.

3Use the / button to select the desired option, and press OK to confirm.

4Press the  button or the BACK button to return to the previous menu.