18 | Using the Remote Control |
Using the remote control
For optimum performance, aim the remote control directly at the player and make sure there are no obstructions between the remote control and the player. The maximum operable ranges from the unit are as follows.
Line of sight: approx. 7 m (original state)
Either side of the centre: approx. 5 m within 30° (original state)
Above: approx. 5 m within 30° (original state) Below: approx. 5 m within 30° (original state)
(Sample Illustration) Remote control - effective range
Do not expose the remote sensor to a strong light source such as direct sunlight or other
illumination. This can damage the | sensor | resulting in | the inability to operate the player via | |
the | remote control. |
|
|
|
Do | not drop or expose the remote | control | to electric | shock. |
Do not expose the remote control excessively hot or humid places to avoid moisture condensation.
Do not | spill | water or place | anything wet on the remote control. | ||
Do not | open | the remote | control unit (other than the battery door). | ||
If the remote control is | not | going | to be used for a long period of time, remove the batteries | ||
to avoid damage caused | by | battery | leakage corrosion. | ||
Direct the remote control at the remote sensor of
Assembling the Desktop stand (Optional)
The Desktop stand comes with the
1.Use a screwdriver (not supplied) to unscrew the screws on the rear panel.
2.Insert the two screws that are included with the player through the holes of the Desktop stand. Align the screw holes on the player with the screws.
3.Gently tighten the screws with the screwdriver (not supplied). In order to use the cover of the Desktop stand slot for the future, please attach it to the bottom of the Desktop stand. Refer to the following figure for details.