24 |
Setting up the player
Find the correct viewing input
1Press the 
button to turn on this product.
2Turn on the TV and switch to the correct
Initial Setting
When you turn on this unit for the first time, or restore all settings to factory defaults, the system will prompt you to perform the initial setup.
1Follow the
OSD Language
For more information, please see the “Language Setting” section on page 34.
Resolution
For more information, please see the “Resolution” section on page 36. 
Aspect ratio
For more information, please see “TV Screen” section on page 36. 
Network Interface
For more information, please see the “Interface” section on page 33. 
Portal Auto Start
For more information, please see “Portal Auto Start” section on page 32.
2After selecting the settings, press the OK button to confirm and exit.
SETTING menu
Press the SETTING button on the remote control to display the setup screen. For more information, please see the “Customizing” on page 30.
ePortal Home
Press the 
button on the remote control to display the ePortal Home screen when there is no disc playing or the player is in Stop mode.
For more information, please see the “Navigating the ePortal Menu” on page 38.
Basic playback
When you wish to view a disc, turn the TV on and select the video input connected to the
1Press 
the button on the front panel or the remote control; your
2Turn the TV on and then select the input setting on the TV that matches the connection method you used to connect your player.
3Press the 
button on the remote control to open the disc tray.
4Place a disc on the disc tray with the label facing up, and then press the 
button to close the disc tray. The disc loading time depends on the types of disc you are loading.
5After loading a disc, the playback starts automatically.
6If a