Sherwood VR-654BD manual SettInG tHe netWoRK, When selecting the Wired, IP Settings

Page 45

VR-654(G)_ENG_100129_VR-654(G) 2010-01-29 오전 10:45 페이지 45

settInG tHe netWoRK

•To access BD-LIVE contents from websites, you should connect this unit to the internet and set the communication settings. (For details, “CONNECTING TO NETWORK” on page 9.)

•When you set the communication setting manually, the following information of the connected router or modem is required. Confirm the information prior to the setting : IP address, Subnet mask, Gateway, Primary DNS and Secondary DNS.

ENGLISH

1. Perform the steps 1 and 2 in “OSD Menu Settings” procedure on page 40 to select the Network.

• Then the network setting menu will be displayed.

Wired :

Configures network settings depending on your internet environment, etc. when connecting to the internet. Network Test :

Detects the internet connection and automatically configures the network settings by the DHCP server function of the router or modem.

■Note :

•When IP Mode is set to Off, Network Test cannot be selected.

2. Press the CURSOR UP/DOWN buttons to select the network configuration mode, then press the OK button.

• When selecting the Network Test, see page 46.

When selecting the Wired

Then the IP Settings menu will be displayed as follows :

IP Settings

Link Status

Link Up

MAC Address

00:23:03:00:50:b4

IP Mode

Dynamic

IP Address

192.168.1.110

Subnet Mask

255.255.255.0

Gateway

192.168.1.1

Primary DNS

168.126.63.1

Secondary DNS

0. 0. 0. 0

Apply

Cancel

3. Press the CURSOR RIGHT button to display the IP Mode.

Off:

Disables this unit’s LAN capabilities.

Manual :

Configures network settings manually. Dynamic (default setting) :

Automatically configures the network settings by the DHCP server function of the router or modem.

■Note :

•Select the Manual only when the DHCP server function of the router or modem cannot be used for the automatic configuration.

4. Press the CURSOR UP/DOWN buttons to select the desired IP Mode, then press the OK button.

■When selecting the manual

•You can select IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS to configure them manually.

•On the IP Settings menu, “Link Status” and “Mac Address” display the corresponding information merely.

①Press the CURSOR UP/DOWN buttons to select the desired option, then press the OK button.

Then the New Value entry screen will be displayed.

Example : When selecting IP Address

Please enter a new IP Address. Valid range of each segment is 0 to 255.

Current value 192.168.1.110

New Value

 

 

.

 

.

 

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK Cancel

②Enter the new value pressing the NUMERIC buttons, then press the CURSOR buttons to select “OK” and press the OK button.

③Repeat the above steps ① and ② until other new values are all entered.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents VR-654BD PAN-EUROPEAN Unified Voltage IntroductionMoisture condensation Leave a space around the unit for sufficient ventilationContents System Connections Connecting AUDIO/VIDEO COmPONENTSVideo output resolution Copyright protection systemHdmi OUT Connecting Digital INs Connecting SPEAkERSConnecting speaker wire Speaker placement Connecting PREOUTsConnecting to NETWORk Connecting for SYSTEm ControlRemote Sensor Front Panel ControlsOPEN/CLOSE Fluorescent Display PLAY/PAUSEUniversal Remote Controls Function Table of the Numbered Buttons EnteRInG a setUP coDeEnter a 3 digit code Repeat the above steps 1 to 4 for each of your componentsLoADInG BAtteRIes ReMote contRoL oPeRAtIon RAnGeWhen SAT, TV, AUx is selected as an input source Basic OperationListening to a PROGRAm Source Adjusting the brightness of the fluorescent display Operating the sleep timerSurround modes SURRoUnD soUnDWhen selecting the BD/DVD When selecting an input source other than BD/DVDMovie DramaSetting the sound parameter SYSTEm SetupTurn the setup menu on Select the desired menu using the Cursor UP/DOWN buttonsWhen selecting the D.m. Dual mono When selecting the L.SYNC Lip-SyncWhen selecting the DRC Dynamic Range Control When selecting the LFE LFE levelSetting the speaker setup About the speaker size When selecting the SPEAkER ConfigurationWhen selecting the Crossover Frequency To cancel the test tone function, press the Return buttonWhen selecting the Channel Level Press the OK button to confirm your selection①. Press the OK button to enter the tone adjustment mode Setting the ToneWhen selecting the SPEAkER Distance About the speaker distanceRegion code PReLIMInARY KnoWLeDGe ABoUt DIscs Playable disc typesUnplayable discs Color system formatSYMBoL ABoUt InVALID oPeRAtIon PLAYABLe FILesCARe AnD HAnDLInG oF DIscs Avchd Advanced Video Codec High Definition DeFInItIon oF teRMsJpeg Joint Photographic Experts Group PLAYInG a DIsc Case of use of the NUmERIC buttons on the remote controlTo start playback from the menu Before starting playbackTo pause playback To stop playbackSlow playback Frame advance playbackPlaying the desired section of disc Displaying disc informationDuring playback, press the GO to button Press the OK buttonPlaying repeatedly Operations using disc menu, top menu, and Pop-up menuPlaying a specific section repeatedly Playing in random orderDuring playback, press the Popup Menu button Switching the audio soundtrackDuring playback, press the Audio button Press the Popup button to exitSwitching the subtitles Switching the camera anglesDuring playback, press the Subtitle button Press the Cursor Right button to enter the PIP mode menu Playing secondary videoPicture in PictureVirtual Package When selecting the Remove from Playlist When selecting the Playlist Optical Disc or the USBWhen selecting the Add To Playlist When selecting the Play FileTo specify the time interval Selecting an item in the play menuWhen entering file number Displaying file informationPlaying the desired section of file When selecting the Slide Show Effects When clearing the number enteredWhen selecting the Slide Show Delay To change the effect on displaying picturesTo control the music files During playback of music files, press the OK buttonOSD Menu Settings SettInG tHe sYsteM SettInG tHe DIsPLAY SettInG tHe LAnGUAGe SettInG tHe AUDIoWhen selecting the Parental Control or the Parental Level SettInG tHe PARentAL contRoLWhen selecting the Parental Password Parental Password CancelWhen selecting the Wired SettInG tHe netWoRKIP Settings When selecting the manualWhen selecting the Network Test When selecting the manual or the DynamicWhen selecting the Off Manual tuning Auto tuningAuto presetting Select the desired FM modeTuning to preset stations Presetting radio stationsTuning MEmORY BACkUP FunctionListening to RDS BROADCASTSFm only FM mode, press the Search Mode buttonSearching for stations by program type Displaying RDS informationREmOTE Control Unit PROBLEm Troubleshooting GuideMAIN Unit AmPLIFIER Section PROBLEm REmEDYBD Player Section Specifications Fm Tuner Section DBf70 / 65 dB Setup Code Table Nordmende Inno HITInterfunk OceanicSampo SambersSamsung SanyoAstra ArconCH.MASTER City COMPreamble GNU General Public LicenseEnglish No Warranty How to Apply These Terms to Your New Programs VR-654BD
Top Page Image Contents