Sherwood VR-654BD manual SettInG tHe DIsPLAY

VR-654(G)_ENG_100129_VR-654(G) 2010-01-29 오전 10:45 페이지 42

settInG tHe DIsPLAY

ENGLISH

•For how to select the setting items and options, refer to “OSD Menu Settings” on page 40.

•Settings with* are the default.

Setting items	Options
	NTSC :
	Select this when the video signal format of your TV and the discs is NTSC
	color system for U.S.A., Canada, etc..
TV Type	PAL :
	Select this when the video signal format is PAL color system for Europe,
Set the video signal format depending on that
	Australia, China, etc..
of your TV and disc.
	■Note :
	• If the color system of this unit is different from that of your TV and the discs,
	the screen may be somewhat hard too see or the picture quality may be
	poor. Only in this case, set the video signal format to another.
	HDMI Auto* :
	HDMI video resolution will be selected automatically depending on the HDMI-
	compatible TV.
Resolution	1080p : Outputs 1080 lines of progressive video.
Set the resolution of the Component and	1080i : Outputs 1080 lines of interlaced video.
HDMI video signal	720p : Outputs 720 lines of progressive video.
	480p : Outputs 480 lines(NTSC)(or 576 lines(PAL)) of progressive video.
	480i : Outputs 480 lines(NTSC)(or 576 lines(PAL)) of interlaced video.
	• For details on Resolution settings, refer to “Video output resolution” on page 6.
	16:9 Wide* :
	Select this when a wide-screen TV is connected. Discs recorded in wide-
	screen format is played back over the entire TV screen.
TV Aspect	16:9 Pillarbox :
Set the picture size according to aspect ratio	When playing back 4:3 images, the picture is displayed in the center of the
of your TV	16:9 screen with a 4:3 aspect ratio.
	4:3 Letterbox :
	Select this to play back the discs recorded in wide-screen format with 4:3 TV
	in the letter box mode (with black strips at the top and bottom).
	On :
	Select this to output 1080/24p video signals from HDMI OUT when playing
	film based materials (24 frame).
	Off* :
Film mode	Select this when playing a materials other than film based materials (24
Set whether to output 1080/24p video signals	frame).
from HDMI OUT when playing film-based	■Notes :
materials (24 frame) on BD discs.	• 1080/24p video signals cannot be output from video OUTs other than HDMI
	OUT.
	• 1080/24p video signals can be output when the following conditions are met.
	- HDMI OUT is connected to TV compatible with 1080/24p video signals.
	- Resolution is set to HDMI Auto or 1080p.
	36 Bit :
	Select this to output the HDMI video signal with the 36 Bit color depth to TV
	which supports 36 Bit HDMI deep color.
	30 Bit :
	Select this to output the HDMI video signal with the 30 Bit color depth.
	24 Bit* :
Color Depth	Select this to output the HDMI video signal without the color depth effect to TV
	which does not support HDMI deep color.
Set whether to output the HDMI video signal
	■Notes :
with the color depth effect or not.
	• For details on HDMI deep color which TV supports, refer to the operating
	instructions of TV.
	• If color depth setting is different from that which TV supports, picture may
	flicker or be displayed abnormally. Should this happen, first make
	(composite) video connection between this unit and TV, and select the
	(composite) VIDEO as an input source on the TV to display the setting
	menu, then set the Color Depth correctly.

42