Sony SDP-E800 Customizing the Sound Fields, 14GB, Compressing the dynamic range except for

Processor Operations

Ill.A VIRTUAL ENHANCED (SURROUND) A

L C R

Ill.B VIRTUAL ENHANCED (SURROUND) B

L C R

Customizing the Sound Fields

Each sound field is composed of equalizer parameters (bass/treble) and surround sound parameters — variables of sound that create the sound image. You can customize the sound fields by adjusting some of the sound parameters (equalizer and/or surround sound parameters) to suit your listening situation.

Once you customize the sound fields, they are stored in memory unless the processor is unplugged for about 1 week. To change a customized sound field, make new adjustments to the respective sound field.

DPC MODE Digital processing control

Ill.C VIRTUAL REAR SHIFT

For REAR SP [SIDE]*

L C R

SL SR

For REAR SP [BEHIND]*

L C R

SLSR

1Start playing a component, then select the sound field you want to adjust.

2Press DPC MODE repeatedly to display on of the following menus:

SP. SETUP

LEVEL ADJUST

SURROUND

EQUALIZER

OTHER SETUP

Ill.D VIRTUAL MULTI REAR

For REAR SP [SIDE]*

L C R

SL SR

For REAR SP [BEHIND]*

L C R

SLSR

3Use digital processing control buttons ( / ) to select the parameter you want.

4Use digital processing control buttons ( / ) to adjust the parameter.

zCompressing the dynamic range (except for

ACOUSTIC)

When inputting a Dolby Digital (AC-3) signal you can compress the dynamic range of the sound track by using the dynamic range compression ratio (D. RANGE COMP) parameter in the surround menu. This may be useful when you want to watch movies at low volumes late at night. See page 16 for details on the dynamic range compression parameter.

L : Front speaker (left)	* See page 8 for details on
R : Front speaker (right)	how to set the rear speaker
C : Centre speaker	position.
SL : Rear speaker (left)
SR : Rear speaker (right)
: Virtual speaker

14GB

Note

Certain parameters may not be available for adjustment depending on the current settings and menu modes.