Samsung SVR-1670 Working on the Quick Setup Menu, Setting the Record Mode, Manual & Event

Page 23

Chapter 5. Quick Setup

This chapter explains the Quick Setup menu, from which you can set the recording mode and the system date and time. You can also turn on event checking and audio, and select the language for the system to use.

This chapter information is presented in the following sections:

▶5.1 Working on the Quick Setup Menu

▶5.2 Setting the Record Mode

▶5.3 Setting the Date and Time

5.1. Working on the Quick Setup Menu

You access the Quick Setup menu by clicking the Quick Setup tab on the OSD. This section explains its options and settings.

 

Figure 5.1.1 Quick Setup Menu

 

 

Option

Settings

 

 

Record Mode

Specify how you want to record: by Schedule & Event, or Manual & Event.

 

 

Schedule

If you select Schedule & Event as the record mode, this option is for the Schedule.

Or

If you select Manual & Event as the record mode, this option is for Program.

Program

 

 

 

Event Check

When you want the system to check for events: Always, according to the Schedule

you selected, or Off (no checking performed).

 

 

 

Language

The language you want to display on menus and screens.

 

 

Time

Set the date and time by which the system is to run, record and timestamp data.

 

 

Record Audio

Set to On or Off.

 

 

5. 2. Setting the Record Mode

This section provides a brief discussion about the record mode settings of Schedule & Event and Manual & Event

Manual & Event

You can configure the product to start recording when the REC button on the front panel is pressed, or when a preset event occurs.

If you set Manual & Event for the Record Mode, you must also select a Program for the Program option. Settings run from Program A through Program Z.

To review (or edit) the definitions of a Program, go to the Record Setup (aka HDD) menu on the OSD and select the Program submenu.

After you’ve selected Manual & Event and its program, press the REC button on the DVR’s front panel to begin the recording. The Rec light will glow red during recording.

Schedule & Event

You can configure the product to start recording on a scheduled date or when a preset event occurs. If you select Schedule & Event, you need to setup the schedule.

1.From the Schedule option, access the Schedule submenu. This menu is in a calendar format showing each day of the week and 24 hours with each day.

2.On this Schedule, select which Program to run on any given day, or hours of that day. Here is an example showing Program A entered as the program to run on Mondays and on Tuesdays from Midnight until Noon.

Select the

Program, A-Z

Figure 5.2.1 Schedule Submenu from Quick Setup

Digital Video Recorder 44 User Guide

Digital Video Recorder 45 User Guide

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Firmware Version Digital Video Recorder SVR-1670User GuideTable of contents During operation Dismantling and CleaningCompliance Statements Disposal ProceduresSVR-1670 Description About the SVR FeaturesFront Panel Overview Package ContentsRear Panel Overview MON Remote ControlButtons on the Remote Control Reinsert the battery cover Hardware InstallationSetting the SVR-1670’s ID for the Remote Control Usable Range of Remote ControlBasic Connections to the SVR-1670 Installing the SVR-1670 in a RackWire Insertion and Removal Working with Input/Output TerminalsConnecting Cameras Basic Connection DiagramConnecting Audio Connecting a MonitorExtended Connections to the SVR-1670 Connecting the Power CableExtended Connection Diagram Sensor Connections and SettingsRelay Connections O Connections And SettingsText Keyboard Serial communication terminal connectionsEthernet Connections Internet/Intranet Connection DiagramRemote Monitoring and Control External storage connectionsTurn on the hub or router Turn on the SVR-1670 Hard Disk Drive InstallationInstalling a Hard Disk Drive Enabling a Hard Disk Drive Connect the Smps switched mode power supply power cablePush the hard disk drive out from the bracket Removing a Hard Disk DriveDisabling a Hard Disk Drive Lift up the loose hard disk bracketOSD Screen Elements Accessing the OSDWorking with the On-Screen Display Saving Your Changes on the OSD Using the On-Screen KeyboardUnderstanding the Menu Structure Accessing the Function MenuWorking with the Function Key Menu Manual & Event Quick SetupWorking on the Quick Setup Menu Setting the Record ModeUsing the System Setup Options Setting the Date and TimeReviewing the System Log Using the System Setup MenuUpdating Firmware Working with the System LogData Using the Disk Options on the System Setup MenuHDD is disabled Working with the Disk Manager SubmenuOn the Password submenu, there are several columns Working with Passwords and PermissionsSetting and Reviewing Permissions Knowing Your PasswordSetting Up for Ethernet Setting up Network CommunicationChanging Passwords DNS1 Setting up for xDSLCommunication To/From the DVR DhcpRegistering a DVR with a Dynamic IP Address Registering with a Ddns ServerVerifying the Connection Status Configuring the DVR for DdnsSetting up Remote Control Devices Setting up for NTP SynchronizationSetting PTZ Options Setting Up Streaming OptionsSetting Up IP Filters Setting Serial PortsWorking on the Schedule Submenu Setting Up for Event RecordingWorking with Events About EventsWorking with the Normal Event Source Submenu Setting Up E-Mail for Event ActionWorking with Normal Events Setting for Text Events Setting the Area for Motion DetectionEmergency Recording Working with PresetsWorking with Digital I/O About Recording Performance & Capacity Scheduling and Recording VideoDefining Programs Setting Up a Schedule Setting Up To RecordAudio Setup Changing Screen Display Setting Up the Camera DisplayAbout Multichannel Screen Display Setting up Auto Sequencing Setting Up the Monitor DisplayUsing Auto Sequencing 10 Pan/Tilt/Zoom Commands Camera CommandsConfiguring Multi Display Layouts Camera Commands from the Func Key MenuSetting Auxiliary Functions Using Pan/TiltUsing Zoom/Focus Loading and Saving PresetsSearching for Recorded Video Controlling Playback with Remote ControlWorking with Recorded Video Various Playback OptionsSelect Time from the Search Menu Searching by TimeSearching by Calendar Date Searching by EventCopying Video About Copying VideoMonitoring Using Web ViewerSystem Requirements Starting Web ViewerControl Relay Sensor StatusPTZ Control Splitting the Screen, Changing Channels, & Screen Capture PlaybackPerformance Appendix A. Specifications of the SVR-1670Specifications of the SVR-1670 DisplayFPS SVR-1670 Recording ProgramsGeneral Pelco · Pelco P · Pelco D SamsungTechwin BoschAGC Appendix D. Factory Default SettingsMM/DD/YYYY Current timeNormal Event Source Ddns IP addr Default IP Net Mask Default NM Gateway Default GWInterval Off Server None Password 0.0SPD NTPExit Save Do not save DVR0MIC Appendix E. Glossary LED FCCGUI IPSVGA Dimension445 405 USBMemo Digital Video Recorder 124 User Guide Digital Video Recorder 126 User Guide Sales Network
Top Page Image Contents