Samsung SVR-1670 manual Setting up for NTP Synchronization, Setting up Remote Control Devices

Page 32

Chapter 7. Communication To/From the DVR

7. 3. Setting up for NTP Synchronization

Network Time Protocol (NTP) synchronizes time between devices on network. On a network, a server provides the base time. The client systems receive the time from that server for synchronization.

7. 4. Setting up Remote Control Devices

You can operate the DVR with various remote control devices.

 

Figure 7.3.1 NTP submenu on the Communication Menu

Set the options to your preferred settings to configure NTP :

 

 

Option

Setting

 

 

Sync With NTP

Turns NTP on or off.

 

 

NYP Mode

Sets NTP Mode to Client, Server or All.

 

 

NTP Server

Determines whether the NTP server is on a local network or on the Internet. This

Location

option is only available if NTP Mode is set to Client.

 

 

NTP Local Server

Sets the IP of the NTP server. Enter either the IP of an NTP server on the local

network or the IP of a DVR with its NTP mode set to Server.

IP

This option is only available if the NTP Server Location is set to Local.

 

 

 

Interval

Set the synchronization interval; how often you want your system to communicate

with the server to synchronize the devices.

 

 

 

 

Figure 7.4.1 Remote Control submenu on the Communication Menu

 

 

Option

Setting

 

 

 

Designation the keyboard operating all DVR functions with the controller buttons.

Remote Keyboard

The default value is 1.

ID

NOTE: If one keyboard is connected to several DVRs, it might conflict with other

 

channels, so a different value should be set for the keyboard address.

 

 

Remote Controller

You can control up to 16 DVRs from one remote control by creating unique IDs for

ID

each DVR.

 

 

Remote

 

Configuration

Enable or Disable configuration to system management software.

Setup

 

 

 

Remote Relay

Enables relays to be operated from the system management software.

 

 

Serial Port

Four serial ports are available for the DVR; two RS-232C ports and two RS-485

ports.

 

 

 

PTZ

Setting up PTZ options.

 

 

Digital Video Recorder 62 User Guide

Digital Video Recorder 63 User Guide

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Digital Video Recorder SVR-1670User Guide Firmware VersionTable of contents Dismantling and Cleaning During operationCompliance Statements Disposal ProceduresSVR-1670 Description Features About the SVRPackage Contents Front Panel OverviewRear Panel Overview MON Remote ControlButtons on the Remote Control Hardware Installation Setting the SVR-1670’s ID for the Remote ControlUsable Range of Remote Control Reinsert the battery coverInstalling the SVR-1670 in a Rack Wire Insertion and RemovalWorking with Input/Output Terminals Basic Connections to the SVR-1670Basic Connection Diagram Connecting CamerasConnecting a Monitor Connecting AudioConnecting the Power Cable Extended Connection DiagramSensor Connections and Settings Extended Connections to the SVR-1670O Connections And Settings Relay ConnectionsSerial communication terminal connections Text KeyboardInternet/Intranet Connection Diagram Remote Monitoring and ControlExternal storage connections Ethernet ConnectionsTurn on the hub or router Turn on the SVR-1670 Hard Disk Drive InstallationInstalling a Hard Disk Drive Connect the Smps switched mode power supply power cable Enabling a Hard Disk DriveRemoving a Hard Disk Drive Disabling a Hard Disk DriveLift up the loose hard disk bracket Push the hard disk drive out from the bracketOSD Screen Elements Accessing the OSDWorking with the On-Screen Display Using the On-Screen Keyboard Saving Your Changes on the OSDUnderstanding the Menu Structure Accessing the Function MenuWorking with the Function Key Menu Quick Setup Working on the Quick Setup MenuSetting the Record Mode Manual & EventSetting the Date and Time Using the System Setup OptionsUsing the System Setup Menu Updating FirmwareWorking with the System Log Reviewing the System LogUsing the Disk Options on the System Setup Menu HDD is disabledWorking with the Disk Manager Submenu DataWorking with Passwords and Permissions Setting and Reviewing PermissionsKnowing Your Password On the Password submenu, there are several columnsSetting Up for Ethernet Setting up Network CommunicationChanging Passwords Setting up for xDSL Communication To/From the DVRDhcp DNS1Registering with a Ddns Server Registering a DVR with a Dynamic IP AddressConfiguring the DVR for Ddns Verifying the Connection StatusSetting up for NTP Synchronization Setting up Remote Control DevicesSetting Up Streaming Options Setting Up IP FiltersSetting Serial Ports Setting PTZ OptionsSetting Up for Event Recording Working with EventsAbout Events Working on the Schedule SubmenuWorking with the Normal Event Source Submenu Setting Up E-Mail for Event ActionWorking with Normal Events Setting the Area for Motion Detection Setting for Text EventsEmergency Recording Working with PresetsWorking with Digital I/O About Recording Performance & Capacity Scheduling and Recording VideoDefining Programs Setting Up To Record Setting Up a ScheduleAudio Setup Changing Screen Display Setting Up the Camera DisplayAbout Multichannel Screen Display Setting up Auto Sequencing Setting Up the Monitor DisplayUsing Auto Sequencing Camera Commands Configuring Multi Display LayoutsCamera Commands from the Func Key Menu 10 Pan/Tilt/Zoom CommandsUsing Pan/Tilt Using Zoom/FocusLoading and Saving Presets Setting Auxiliary FunctionsControlling Playback with Remote Control Working with Recorded VideoVarious Playback Options Searching for Recorded VideoSearching by Time Searching by Calendar DateSearching by Event Select Time from the Search MenuAbout Copying Video Copying VideoUsing Web Viewer System RequirementsStarting Web Viewer MonitoringControl Relay Sensor StatusPTZ Control Playback Splitting the Screen, Changing Channels, & Screen CaptureAppendix A. Specifications of the SVR-1670 Specifications of the SVR-1670Display PerformanceFPS SVR-1670 Recording ProgramsGeneral Samsung TechwinBosch Pelco · Pelco P · Pelco DAppendix D. Factory Default Settings MM/DD/YYYYCurrent time AGCNormal Event Source IP addr Default IP Net Mask Default NM Gateway Default GW Interval Off Server None Password0.0 DdnsNTP SPDExit Save Do not save DVR0MIC Appendix E. Glossary FCC GUIIPS LEDDimension 445 405USB VGAMemo Digital Video Recorder 124 User Guide Digital Video Recorder 126 User Guide Sales Network
Top Page Image Contents