Chapter 10. Camera Commands
| Figure 10.2.1 PTZ Menu | |
|
| |
Option | Description | |
|
| |
P/T | P/T stands for Pan/Tilt. Select this button to operate the Pan or Tilt features of the | |
camera. | ||
| ||
|
| |
Z/F | Z/F stands for Zoom/Focus. Select this button to operate the Zoom or Focus | |
features of the camera. | ||
| ||
|
| |
Menu | Opens the PTZ menu. To exit the menu, press the PTZ button on the front panel. | |
|
| |
Preset |
| |
with Load and | You can define where and how you want the camera to position itself. | |
Save |
| |
|
| |
Aux | Aux stands for Auxiliary, meaning special functions of your particular brand or | |
model of PTZ camera. For this option, you enter the number that corresponds to | ||
with On and Off | ||
the particular auxiliary function you want to use. | ||
| ||
|
|
Using Pan/Tilt
To pan or tilt a camera, select P/T from the PTZ menu.
·To pan the camera, press the left or right arrow key on the front panel, or click the left or right area of the screen.
·To tilt the camera, press the up or down arrow key on the front panel or click the top or bottom of the screen.
Using Zoom/Focus
To zoom or focus a camera, select Z/T from the PTZ menu.
· Use the mouse of the buttons on the front panel to zoom or focus on the image.
Loading and Saving Presets
A preset is a defined camera position; you preset the camera angle and focus. You must first setup camera preset with PTZ attached to each channel.
To activate a preset location : 1. Go to the PTZ menu.
2.Select a preset number.
3.Select Load and then press the ENTER button.
The camera will pan, tilt or zoom to the specifications of that preset condition.
To save a
1.Pan, tilt and zoom the camera until it adjusted to the position you want to save.
2.Go to the PTZ menu.
3.In the Preset field, select a preset number.
4.Select Save and then press the ENTER button.
Setting Auxiliary Functions
The Auxiliary feature is used for special functions of a PTZ camera. Specific features depend on the particular make and model of camera you are using. Refer to the manufacturer’s documentation for information on auxiliary functions.
To use the Auxiliary function :
1.Go to the PTZ menu.
2.To turn on the Auxiliary function, select On.
3.Set up to 16 Auxiliary numbers.
4.To turn off an Auxiliary function, select the Auxiliary number you wish to turn off and select Off.
Setting the Console Menu
If the PTZ camera is connected to the DVR with the Samsung SPD protocol, you can configure the camera using its console menu.
To access a camera’s console menu :
1.Use the navigation keys on the front panel to select camera settings.
2.Press ENTER to accept your settings.
Digital Video Recorder 86 User Guide | Digital Video Recorder 87 User Guide |