Samsung SVR-1670 manual Setting the Date and Time, Using the System Setup Options

Page 24

Chapter 5. Quick Setup

3.Once you have completed the Record setup, notice the Rec light on the DVR’s front panel flickers and the symbol S displays to show that all channels are recording as scheduled.

5.3. Setting the Date and Time

Setting the system time is very important for the validity of your recorded data. The date and time you set governs all schedules your subsequently configure for the DVR. The date and time appear on all monitor displays and on all timestamps for events.

Plan carefully if you need to set the date and time! Back up video before changing the time.

Do not change time setting while recording. Doing so can compromise the date stamping of the recording.

To set the date and time, follow these steps :

1.Select the Time option from the Quick Set menu.

2.Enter the time zone for the camera location. (The default setting is UTC 00:00 Dublin.)

Figure 5.3.1 System Time Submenu on Quick Setup

3.Set Daylight Savings to on or off. (The Daylight Savings option is only available if daylight saving time is used in the time zone you selected.)

4.Select the Date Format you prefer.

- Formats are YYYY/MM/DD or MM/DD/YYYY or DD/MM/YYYY.

5.Set the Time by entering data in each of the Date fields and in the Hour/Minutes/ Seconds fields.

6.Click the Apply Date/Time button to confirm and save the settings.

· When the confirmation message appears, select Yes if you want to confirm your changes to the date/time setting.

Chapter 6. Using the System Setup Menu

This chapter provides information about the features on the OSD’s System Setup menu, from which you setup various system-wide controls for the DVR

The information is presented in these sections :

▶6.1 Using theSystem Setup Options

▶6.2 Using the Disk Options on the System Setup Menu.

▶6.3 Working with Passwords and Permissions.

6.1 Using the System Setup Options

You access the System Setup menu by clicking its tab on the OSD. This section explains its four submenus, their options and settings.

 

Figure 6.1.1 System submenu on the System Setup Menu

 

 

Option

Settings

 

 

Language

Select a language.

 

 

Key Buzzer

Select On if you want a buzzer to sound when you use the buttons on the front panel.

 

 

Default

Select if you want to restore the factory default settings. At the warning message,

select “Yes” again to restore the settings.

 

 

 

Load/Save

Select Save if you want to save settings to USB storage.

Configuration

Select Load if you want to load stored settings from USB storage.

 

 

Firmware Update

Select to update firmware from USB storage and connect it to the SVR-1670

 

 

DVR Alias

Set a SVR-1670 alias; that is, give the SVR-1670 its own name such as “Main

Floor,” “Headquarters,” or “Fred.”

 

 

 

System Log

Displays a log, by time, of various events within the system

 

 

Time

Set the system time. You can set the time in two places: here and on the Quick

Start menu.

 

 

 

Digital Video Recorder 46 User Guide

Digital Video Recorder 47 User Guide

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Digital Video Recorder SVR-1670User Guide Firmware VersionTable of contents Dismantling and Cleaning During operationDisposal Procedures SVR-1670 DescriptionCompliance Statements Features About the SVRPackage Contents Front Panel OverviewRear Panel Overview Remote Control Buttons on the Remote ControlMON Hardware Installation Setting the SVR-1670’s ID for the Remote ControlUsable Range of Remote Control Reinsert the battery coverInstalling the SVR-1670 in a Rack Wire Insertion and RemovalWorking with Input/Output Terminals Basic Connections to the SVR-1670Basic Connection Diagram Connecting CamerasConnecting a Monitor Connecting AudioConnecting the Power Cable Extended Connection DiagramSensor Connections and Settings Extended Connections to the SVR-1670O Connections And Settings Relay ConnectionsSerial communication terminal connections Text KeyboardInternet/Intranet Connection Diagram Remote Monitoring and ControlExternal storage connections Ethernet ConnectionsHard Disk Drive Installation Installing a Hard Disk DriveTurn on the hub or router Turn on the SVR-1670 Connect the Smps switched mode power supply power cable Enabling a Hard Disk DriveRemoving a Hard Disk Drive Disabling a Hard Disk DriveLift up the loose hard disk bracket Push the hard disk drive out from the bracketAccessing the OSD Working with the On-Screen DisplayOSD Screen Elements Using the On-Screen Keyboard Saving Your Changes on the OSDAccessing the Function Menu Working with the Function Key MenuUnderstanding the Menu Structure Quick Setup Working on the Quick Setup MenuSetting the Record Mode Manual & EventSetting the Date and Time Using the System Setup OptionsUsing the System Setup Menu Updating FirmwareWorking with the System Log Reviewing the System LogUsing the Disk Options on the System Setup Menu HDD is disabledWorking with the Disk Manager Submenu DataWorking with Passwords and Permissions Setting and Reviewing PermissionsKnowing Your Password On the Password submenu, there are several columnsSetting up Network Communication Changing PasswordsSetting Up for Ethernet Setting up for xDSL Communication To/From the DVRDhcp DNS1Registering with a Ddns Server Registering a DVR with a Dynamic IP AddressConfiguring the DVR for Ddns Verifying the Connection StatusSetting up for NTP Synchronization Setting up Remote Control DevicesSetting Up Streaming Options Setting Up IP FiltersSetting Serial Ports Setting PTZ OptionsSetting Up for Event Recording Working with EventsAbout Events Working on the Schedule SubmenuSetting Up E-Mail for Event Action Working with Normal EventsWorking with the Normal Event Source Submenu Setting the Area for Motion Detection Setting for Text EventsWorking with Presets Working with Digital I/OEmergency Recording Scheduling and Recording Video Defining ProgramsAbout Recording Performance & Capacity Setting Up To Record Setting Up a ScheduleAudio Setup Setting Up the Camera Display About Multichannel Screen DisplayChanging Screen Display Setting Up the Monitor Display Using Auto SequencingSetting up Auto Sequencing Camera Commands Configuring Multi Display LayoutsCamera Commands from the Func Key Menu 10 Pan/Tilt/Zoom CommandsUsing Pan/Tilt Using Zoom/FocusLoading and Saving Presets Setting Auxiliary FunctionsControlling Playback with Remote Control Working with Recorded VideoVarious Playback Options Searching for Recorded VideoSearching by Time Searching by Calendar DateSearching by Event Select Time from the Search MenuAbout Copying Video Copying VideoUsing Web Viewer System RequirementsStarting Web Viewer MonitoringSensor Status PTZ ControlControl Relay Playback Splitting the Screen, Changing Channels, & Screen CaptureAppendix A. Specifications of the SVR-1670 Specifications of the SVR-1670Display PerformanceSVR-1670 Recording Programs GeneralFPS Samsung TechwinBosch Pelco · Pelco P · Pelco DAppendix D. Factory Default Settings MM/DD/YYYYCurrent time AGCNormal Event Source IP addr Default IP Net Mask Default NM Gateway Default GW Interval Off Server None Password0.0 DdnsNTP SPDDVR0 MICExit Save Do not save Appendix E. Glossary FCC GUIIPS LEDDimension 445 405USB VGAMemo Digital Video Recorder 124 User Guide Digital Video Recorder 126 User Guide Sales Network
Top Page Image Contents