Samsung SVR-1670 manual Setting Up the Monitor Display, Using Auto Sequencing

Page 42

Chapter 9. Camera and Monitor Display Setup

different layout on the split screen :

Using the MULTI button on the Function menu.

1.Open the Function Menu and press the MULTI button .

2.A list of layout configuration options displays on screen. Select the layout you wish to see. For example, if you select “11,” channel 11 will display in full screen. If you select “ 9A,” the screen will split to show those 9 channels.

3.Press ESC to close the menu.

9.3 Setting Up the Monitor Display

You configure the display for each monitor using the Monitor submenu.

 

Figure 9.3.1 Monitor submenu on the Display Setup Menu

 

 

Option

Description

 

 

 

Select the monitor you want to configure.

Monitor Number

Monitor 1 is available for all supported DVR functions. Monitors 2, 3 and 4 are

 

available for live viewing and recording, but not available for playback and search.

 

 

Covert Channel

Set any video channel you want to remain private and accessible only with specific

permission. This channel will be hidden in live and playback modes.

 

 

 

Sequencing

Set the order in which monitor images display in an auto sequence.

 

 

Dwell Time

Set the amount of time a monitor image displays before the next image in the auto

sequence appears.

 

 

 

Multi Display

Select the monitor images you want to appear for the split screen configurations

4E, 9B or 10A.

 

 

 

VGA Mode

Enter the dimensions of your monitor.

 

 

 

Select information you want to show, superimposed on the video:

 

· For live video feeds, you can set the time, channel name, event, recording status,

On Screen Display

HDD usage, remote control ID and text.

·For video playback, you can set the time, command, channel name, event and text display.

9.4 Using Auto Sequencing

Auto Sequencing automatically rotates display of the live feeds from cameras. You can set up the 16 “spots” in the rotation. Each camera’s image displays in the order you determine, for the amount of time you set (as the Dwell Time option). After each image displays in sequence, the rotation begins again and plays continuously until you stop it.

Setting up Auto Sequencing

You set up auto sequencing while entering settings for the options on the Monitor submenu of

the Displays Settings menu :

1.On the Monitor submenu, select the Monitor for which you are setting options.

2.Select the Sequencing option. The Seq screen appears.

Figure 9.4.1 Sequencing submenu

3.Set the channel you want to appear first, second, third and so on in the sequence. You can set up to 16 channels (or less if you wish).

Figure 9.4.1 shows some defined sequences :

·First in sequence is Channel 1. Channel 1 will appear in single screen.

·Second in sequence is 16Div. All 16 channels will appear on a split screen.

·Third in sequence is 4A. The four 4A channels will appear in split screen.

Digital Video Recorder 82 User Guide

Digital Video Recorder 83 User Guide

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Digital Video Recorder SVR-1670User Guide Firmware VersionTable of contents Dismantling and Cleaning During operationDisposal Procedures SVR-1670 DescriptionCompliance Statements Features About the SVRPackage Contents Front Panel OverviewRear Panel Overview Remote Control Buttons on the Remote ControlMON Usable Range of Remote Control Hardware InstallationSetting the SVR-1670’s ID for the Remote Control Reinsert the battery coverWorking with Input/Output Terminals Installing the SVR-1670 in a RackWire Insertion and Removal Basic Connections to the SVR-1670Basic Connection Diagram Connecting CamerasConnecting a Monitor Connecting AudioSensor Connections and Settings Connecting the Power CableExtended Connection Diagram Extended Connections to the SVR-1670O Connections And Settings Relay ConnectionsSerial communication terminal connections Text KeyboardExternal storage connections Internet/Intranet Connection DiagramRemote Monitoring and Control Ethernet ConnectionsHard Disk Drive Installation Installing a Hard Disk DriveTurn on the hub or router Turn on the SVR-1670 Connect the Smps switched mode power supply power cable Enabling a Hard Disk DriveLift up the loose hard disk bracket Removing a Hard Disk DriveDisabling a Hard Disk Drive Push the hard disk drive out from the bracketAccessing the OSD Working with the On-Screen DisplayOSD Screen Elements Using the On-Screen Keyboard Saving Your Changes on the OSDAccessing the Function Menu Working with the Function Key MenuUnderstanding the Menu Structure Setting the Record Mode Quick SetupWorking on the Quick Setup Menu Manual & EventSetting the Date and Time Using the System Setup OptionsWorking with the System Log Using the System Setup MenuUpdating Firmware Reviewing the System LogWorking with the Disk Manager Submenu Using the Disk Options on the System Setup MenuHDD is disabled DataKnowing Your Password Working with Passwords and PermissionsSetting and Reviewing Permissions On the Password submenu, there are several columnsSetting up Network Communication Changing PasswordsSetting Up for Ethernet Dhcp Setting up for xDSLCommunication To/From the DVR DNS1Registering with a Ddns Server Registering a DVR with a Dynamic IP AddressConfiguring the DVR for Ddns Verifying the Connection StatusSetting up for NTP Synchronization Setting up Remote Control DevicesSetting Serial Ports Setting Up Streaming OptionsSetting Up IP Filters Setting PTZ OptionsAbout Events Setting Up for Event RecordingWorking with Events Working on the Schedule SubmenuSetting Up E-Mail for Event Action Working with Normal EventsWorking with the Normal Event Source Submenu Setting the Area for Motion Detection Setting for Text EventsWorking with Presets Working with Digital I/OEmergency Recording Scheduling and Recording Video Defining ProgramsAbout Recording Performance & Capacity Setting Up To Record Setting Up a ScheduleAudio Setup Setting Up the Camera Display About Multichannel Screen DisplayChanging Screen Display Setting Up the Monitor Display Using Auto SequencingSetting up Auto Sequencing Camera Commands from the Func Key Menu Camera CommandsConfiguring Multi Display Layouts 10 Pan/Tilt/Zoom CommandsLoading and Saving Presets Using Pan/TiltUsing Zoom/Focus Setting Auxiliary FunctionsVarious Playback Options Controlling Playback with Remote ControlWorking with Recorded Video Searching for Recorded VideoSearching by Event Searching by TimeSearching by Calendar Date Select Time from the Search MenuAbout Copying Video Copying VideoStarting Web Viewer Using Web ViewerSystem Requirements MonitoringSensor Status PTZ ControlControl Relay Playback Splitting the Screen, Changing Channels, & Screen CaptureDisplay Appendix A. Specifications of the SVR-1670Specifications of the SVR-1670 PerformanceSVR-1670 Recording Programs GeneralFPS Bosch SamsungTechwin Pelco · Pelco P · Pelco DCurrent time Appendix D. Factory Default SettingsMM/DD/YYYY AGCNormal Event Source 0.0 IP addr Default IP Net Mask Default NM Gateway Default GWInterval Off Server None Password DdnsNTP SPDDVR0 MICExit Save Do not save Appendix E. Glossary IPS FCCGUI LEDUSB Dimension445 405 VGAMemo Digital Video Recorder 124 User Guide Digital Video Recorder 126 User Guide Sales Network
Top Page Image Contents