Samsung SVR-1670 Camera Commands, Configuring Multi Display Layouts, 10 Pan/Tilt/Zoom Commands

Page 43

Chapter 9. Camera and Monitor Display Setup

4.Once you have setup the sequences, close the Seq submenu to return to the Monitor submenu to set the Dwell Time.

5.For the Dwell Time option, enter the amount of time you want each channel to appear on the monitor (from 1 to 60 seconds).

·You must set a Dwell Time to activate Auto Sequencing. If Dwell Time is set to Off, Auto Sequencing will not work.

Running Auto Sequencing

There are two ways to turn on Auto Sequencing so you can view it on your monitor:

·On the front panel, press the AUTO button.

·On the Function Key menu, press the Auto button .

To stop Auto Sequencing, press either button again. (This stops it from running; it does not erase your settings.)

9. 5 Configuring Multi Display Layouts

You can configure which channels you want to display in the 4E, 9B and 10A multichannel setting.

You set up multi display while entering settings for the options on the Monitor submenu of the Displays Settings menu :

1.On the Monitor submenu, select the Monitor for which you are setting options.

2.For the Multi Display option, select first the configuration you want to set : 4E, 9B or 10A.

3.Next, access the Multi Display submenu.

The Multi Display submenu shows grid appropriate to the configuration you selected: split by 4, split by 9, or split by 10.

4.Click in the Channel’s box for each channel you want to include in the multi display. For example, if you are setting up a 9B, select 9 channels.

-The grid displays where the channel’s image will appear.

-The order in which you click the boxes is the order in which the channels appear on the grid.

Figure 9.5.1 Multi Display Layouts

Chapter 10. Camera Commands

This chapter explains how you execute various camera commands, while viewing live video, from controls on the FUNC menu and on the PTZ menu.

The information is presented in these sections:

▶10. 1 Camera Commands from the FUNC Menu

▶10. 2 Pan/Tilt/Zoom Commands

10.1 Camera Commands from the FUNC Key Menu

While viewing live video, you can use the FUNC menu pause the video and zoom in on the image.

Pausing Live Video

To pause live video, press the PAUSE button. Press the button again to resume live video.

Zooming In on Live Video

When viewing a single channel in full-screen mode, you can zoom in on the image. Zooming allows you to move in 18 levels horizontally and 12 levels vertically.

1.Press FUNC to access the Function menu.

2.Select the Zoom button.

·The camera location defaults to the center of the screen.

3.Select the “Plus” button and press ENTER or left-click the video pane.

·To reposition the image, use the navigation keys on the FUNC menu :

10. 2 Pan/Tilt/Zoom Commands

If you connect a PTZ controller to you PTZ camera, you can control pan, tilt and zoom while watching live video. Once you have the controller configured, you can access and work with the PTZ menu.

Accessing the PTZ Menu

1.Press the channel button to select the channel you wish to view.

2.Press either the PTZ button or the FUNC button on the front panel.

3.The PTZ menu appears, superimposed on the camera’s image.

Digital Video Recorder 84 User Guide

Digital Video Recorder 85 User Guide

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Firmware Version Digital Video Recorder SVR-1670User GuideTable of contents During operation Dismantling and CleaningSVR-1670 Description Disposal ProceduresCompliance Statements About the SVR FeaturesFront Panel Overview Package ContentsRear Panel Overview Buttons on the Remote Control Remote ControlMON Reinsert the battery cover Hardware InstallationSetting the SVR-1670’s ID for the Remote Control Usable Range of Remote ControlBasic Connections to the SVR-1670 Installing the SVR-1670 in a RackWire Insertion and Removal Working with Input/Output TerminalsConnecting Cameras Basic Connection DiagramConnecting Audio Connecting a MonitorExtended Connections to the SVR-1670 Connecting the Power CableExtended Connection Diagram Sensor Connections and SettingsRelay Connections O Connections And SettingsText Keyboard Serial communication terminal connectionsEthernet Connections Internet/Intranet Connection DiagramRemote Monitoring and Control External storage connectionsInstalling a Hard Disk Drive Hard Disk Drive InstallationTurn on the hub or router Turn on the SVR-1670 Enabling a Hard Disk Drive Connect the Smps switched mode power supply power cablePush the hard disk drive out from the bracket Removing a Hard Disk DriveDisabling a Hard Disk Drive Lift up the loose hard disk bracketWorking with the On-Screen Display Accessing the OSDOSD Screen Elements Saving Your Changes on the OSD Using the On-Screen KeyboardWorking with the Function Key Menu Accessing the Function MenuUnderstanding the Menu Structure Manual & Event Quick SetupWorking on the Quick Setup Menu Setting the Record ModeUsing the System Setup Options Setting the Date and TimeReviewing the System Log Using the System Setup MenuUpdating Firmware Working with the System LogData Using the Disk Options on the System Setup MenuHDD is disabled Working with the Disk Manager SubmenuOn the Password submenu, there are several columns Working with Passwords and PermissionsSetting and Reviewing Permissions Knowing Your PasswordChanging Passwords Setting up Network CommunicationSetting Up for Ethernet DNS1 Setting up for xDSLCommunication To/From the DVR DhcpRegistering a DVR with a Dynamic IP Address Registering with a Ddns ServerVerifying the Connection Status Configuring the DVR for DdnsSetting up Remote Control Devices Setting up for NTP SynchronizationSetting PTZ Options Setting Up Streaming OptionsSetting Up IP Filters Setting Serial PortsWorking on the Schedule Submenu Setting Up for Event RecordingWorking with Events About EventsWorking with Normal Events Setting Up E-Mail for Event ActionWorking with the Normal Event Source Submenu Setting for Text Events Setting the Area for Motion DetectionWorking with Digital I/O Working with PresetsEmergency Recording Defining Programs Scheduling and Recording VideoAbout Recording Performance & Capacity Setting Up a Schedule Setting Up To RecordAudio Setup About Multichannel Screen Display Setting Up the Camera DisplayChanging Screen Display Using Auto Sequencing Setting Up the Monitor DisplaySetting up Auto Sequencing 10 Pan/Tilt/Zoom Commands Camera CommandsConfiguring Multi Display Layouts Camera Commands from the Func Key MenuSetting Auxiliary Functions Using Pan/TiltUsing Zoom/Focus Loading and Saving PresetsSearching for Recorded Video Controlling Playback with Remote ControlWorking with Recorded Video Various Playback OptionsSelect Time from the Search Menu Searching by TimeSearching by Calendar Date Searching by EventCopying Video About Copying VideoMonitoring Using Web ViewerSystem Requirements Starting Web ViewerPTZ Control Sensor StatusControl Relay Splitting the Screen, Changing Channels, & Screen Capture PlaybackPerformance Appendix A. Specifications of the SVR-1670Specifications of the SVR-1670 DisplayGeneral SVR-1670 Recording ProgramsFPS Pelco · Pelco P · Pelco D SamsungTechwin BoschAGC Appendix D. Factory Default SettingsMM/DD/YYYY Current timeNormal Event Source Ddns IP addr Default IP Net Mask Default NM Gateway Default GWInterval Off Server None Password 0.0SPD NTPMIC DVR0Exit Save Do not save Appendix E. Glossary LED FCCGUI IPSVGA Dimension445 405 USBMemo Digital Video Recorder 124 User Guide Digital Video Recorder 126 User Guide Sales Network
Top Page Image Contents