Samsung SVR-1670 manual Setting Up Streaming Options, Setting Up IP Filters, Setting Serial Ports

Page 33

Chapter 7. Communication To/From the DVR

Setting Serial Ports

To set the serial port, first select the COM (communication port) :

∙COM1 and COM3 are fixed to RS-232C

∙COM2 uses RS-422/RS485

∙COM4 uses RS-485.

1.Access the Serial submenu (to the right of the COM selection).

2.For the Devise option, select a connected device.

3.Set the other selections— Baud rate, the Parity, Stop Bit and Data Bit—as appropriate for the device you’ve chosen.

Setting PTZ Options

To set PTZ options for your cameras, first specify the camera’s channel, 1 through 16.

1.Access the PTZ submenu (to the right of the PTZ channel selection).

2.Set PTZ Home to On if you want the camera to return to home if PTZ is not controlled for a specified period of time. Otherwise, set to Off.

3.If PTZ Home is set to On, set the PTZ Idle Time. This is the duration of time before which the camera returns to home. For example, if you set this to 5 seconds, PTZ returns to Home when PTZ is not controlled for more than 5 seconds.

4.Set the PTZ Port by selecting the port to which the camera channel is connected.

5.Select the Camera ID of the connected PTZ camera.

7. 5 Setting Up Streaming Options

You can set up the SVR-1670 for streaming data. This section describes how to set up streaming options.

•RTSP/TCP : Convenient to use in conjunction with a simple firewall that allows RTSP transmission.

•RTP/UDP : Effective when the latest video data from a camera must be transferred, even if it causes video loss.

•RTSP Standard Port (554) : Select to use the RTSP standard port (554).

Option

Setting

 

 

RTSP/TCP

Select to use RTSP/TCP.

 

 

RTP/UDP

Select to use RTP/UDP.

 

 

RTSP Standard

Select to use the RTSP standard port.

Port(554)

 

 

 

7. 6 Setting Up IP Filters

You can selectively block or allow IPs to access the SVR-1670.

Option

Setting

 

 

Use

Select to use the IP filter.

 

 

Default Policy

Select to block or allow IPs using the default policy.

 

 

IP Range

Select a range of IPs to block or allow; Check the checkbox, and then enter the IPs.

 

 

Digital Video Recorder 64 User Guide

Digital Video Recorder 65 User Guide

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Firmware Version Digital Video Recorder SVR-1670User GuideTable of contents During operation Dismantling and CleaningDisposal Procedures SVR-1670 DescriptionCompliance Statements About the SVR FeaturesFront Panel Overview Package ContentsRear Panel Overview Remote Control Buttons on the Remote ControlMON Setting the SVR-1670’s ID for the Remote Control Hardware InstallationUsable Range of Remote Control Reinsert the battery coverWire Insertion and Removal Installing the SVR-1670 in a RackWorking with Input/Output Terminals Basic Connections to the SVR-1670Connecting Cameras Basic Connection DiagramConnecting Audio Connecting a MonitorExtended Connection Diagram Connecting the Power CableSensor Connections and Settings Extended Connections to the SVR-1670Relay Connections O Connections And SettingsText Keyboard Serial communication terminal connectionsRemote Monitoring and Control Internet/Intranet Connection DiagramExternal storage connections Ethernet ConnectionsHard Disk Drive Installation Installing a Hard Disk DriveTurn on the hub or router Turn on the SVR-1670 Enabling a Hard Disk Drive Connect the Smps switched mode power supply power cableDisabling a Hard Disk Drive Removing a Hard Disk DriveLift up the loose hard disk bracket Push the hard disk drive out from the bracketAccessing the OSD Working with the On-Screen DisplayOSD Screen Elements Saving Your Changes on the OSD Using the On-Screen KeyboardAccessing the Function Menu Working with the Function Key MenuUnderstanding the Menu Structure Working on the Quick Setup Menu Quick SetupSetting the Record Mode Manual & EventUsing the System Setup Options Setting the Date and TimeUpdating Firmware Using the System Setup MenuWorking with the System Log Reviewing the System LogHDD is disabled Using the Disk Options on the System Setup MenuWorking with the Disk Manager Submenu DataSetting and Reviewing Permissions Working with Passwords and PermissionsKnowing Your Password On the Password submenu, there are several columnsSetting up Network Communication Changing PasswordsSetting Up for Ethernet Communication To/From the DVR Setting up for xDSLDhcp DNS1Registering a DVR with a Dynamic IP Address Registering with a Ddns ServerVerifying the Connection Status Configuring the DVR for DdnsSetting up Remote Control Devices Setting up for NTP SynchronizationSetting Up IP Filters Setting Up Streaming OptionsSetting Serial Ports Setting PTZ OptionsWorking with Events Setting Up for Event RecordingAbout Events Working on the Schedule SubmenuSetting Up E-Mail for Event Action Working with Normal EventsWorking with the Normal Event Source Submenu Setting for Text Events Setting the Area for Motion DetectionWorking with Presets Working with Digital I/OEmergency Recording Scheduling and Recording Video Defining ProgramsAbout Recording Performance & Capacity Setting Up a Schedule Setting Up To RecordAudio Setup Setting Up the Camera Display About Multichannel Screen DisplayChanging Screen Display Setting Up the Monitor Display Using Auto SequencingSetting up Auto Sequencing Configuring Multi Display Layouts Camera CommandsCamera Commands from the Func Key Menu 10 Pan/Tilt/Zoom CommandsUsing Zoom/Focus Using Pan/TiltLoading and Saving Presets Setting Auxiliary FunctionsWorking with Recorded Video Controlling Playback with Remote ControlVarious Playback Options Searching for Recorded VideoSearching by Calendar Date Searching by TimeSearching by Event Select Time from the Search MenuCopying Video About Copying VideoSystem Requirements Using Web ViewerStarting Web Viewer MonitoringSensor Status PTZ ControlControl Relay Splitting the Screen, Changing Channels, & Screen Capture PlaybackSpecifications of the SVR-1670 Appendix A. Specifications of the SVR-1670Display PerformanceSVR-1670 Recording Programs GeneralFPS Techwin SamsungBosch Pelco · Pelco P · Pelco DMM/DD/YYYY Appendix D. Factory Default SettingsCurrent time AGCNormal Event Source Interval Off Server None Password IP addr Default IP Net Mask Default NM Gateway Default GW0.0 DdnsSPD NTPDVR0 MICExit Save Do not save Appendix E. Glossary GUI FCCIPS LED445 405 DimensionUSB VGAMemo Digital Video Recorder 124 User Guide Digital Video Recorder 126 User Guide Sales Network
Top Page Image Contents