Samsung SRD-852D External HDDs to the DVR, HDD installed. Try again with a different HDD

Page 106

appendix

Symptom

 

 

 

 

Countermeasures

I've found that the DVR does not recognize as many

y It takes time for the DVR to recognize multiple external HDDs. Try again

disks as installed when I have connected multiple

in a moment and if the problem (of failure to recognize as many HDDs

external HDDs to the DVR.

as connected) persists, it may occur due to a mechanical error of the

 

HDD installed. Try again with a different HDD.

A message of “Need to reset date/time.” Is displayed

y This message is displayed if there occurs a problem with the time

on the screen.

setting of the internal clock or an error in the clock itself.

 

Contact the retailer or the service center for more information.

The time bar is not displayed in Search mode.

y The timeline can switch between normal and extension mode.

 

In extension mode, the time bar may not be displayed in the current

 

timeline. Switch to normal mode or use the left or right button to

 

navigate through the time bar.

The “NO HDD” icon and an error message are

y Check the HDD for connection. If the problem persists in a normal

displayed.

condition, contact the nearest service center to have the HDD checked

 

by the service personnel.

I have installed an additional HDD on the DVR but it

y See the compatibilty list to check if the additional HDD is supported by

does not recognize the HDD.

the DVR. For the compatibility list, contact the retailer where you

 

purchased the DVR.

I have connected an external storage device (external

y See the compatibility list of external storage devices to check if the

SATA HDD) to the DVR but the DVR seems not to

connected device is supported by the DVR.

recognize it.

For the compatibility list, contact the retailer where you purchased the

 

DVR.

 

If I press the ESC key in full screen mode of the

y Press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and press the ESC

WebViewer, the system does not switch to a normal

key again. The system will switch to a normal split mode.

split mode.

 

 

 

 

 

I found it difficult to configure the network settings if

y For more information, refer to the user manual.

using the default search, backup and router settings.

y If you want to check the basics of the product for a quick start, refer to

 

the quick start guide (backup, search).

 

y If you use the router for network connection, refer to the “Connecting

 

to the Internet using the router” section in this manual.

I forgot the password.

y Contact the DVR administrator for help.

Backup data is just not played by the PC or DVR.

y When you are backing up data, you have choices about the player

 

either: PC or DVR. Make your selection before proceeding.

 

y If you are using the PC to play the data, the format of the backup file

 

should be either AVI or SEC.

 

y If you are using the DVR for this purpose, formatting backup files should

 

be done by the DVR.

My player does not switch to Live mode while in

y Press the Stop [@] button on the DVR or the remote control, or click the

playback.

[

 

 

 

] icon on the launcher to switch to Live mode.

 

 

 

 

 

 

 

 

 

106_ appendix

Page 105 Page 107
Image 106
Page 105 Page 107
Contents SRD-852D/1652D Features OverviewImportant Safety Instructions  OverviewNormal capacity 170mAh Before StartContinuous standard load 0.2mA Package Contents Standards ApprovalsContents Viewer Setup Using Live ViewerUsing Search Viewer SEC Backup ViewerPart Names and Functions Front SRD-852DMode AlarmREC AudioPart Names and Functions Rear SRD-852D SRD-1652DVideo OUT Audio OUTVideo VGAChannel Remote ControlUsing the Numeric buttons Press each button between 1 toChanging the Remote Control ID Press any button among 1 toChecking the Installation Environment Please take note of the followings before using this productInstallation Rack InstallationHDD Addition If adding HDDs First, loosen the screws on both sides and remove the coverEnglish Connecting the USB Connecting the VIDEO, AUDIO, and Monitor The following figures are based on Model SRD-1652D Connecting the Alarm INPUT/OUTPUT Connecting POS Device Connecting with Other Device Connecting the RS-485 Device Connecting to Internet through Ethernet 10/100BaseT Connecting the NetworkConnecting to the Internet using the router Connecting to Internet through Adsl Shutting Down the System Getting StartedStarting the system  LiveLocking All Buttons Login By default, initial ID and password are set to admin, You will see the context sensitive menu as in the rightLive Screen Configuration Icons on the Live ScreenSplit Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu ZoomView the Launcher Menu  SRD-852D do not support the 16-split screen modePTZ Alarm Freeze System Date/Time/Language Time.Switching the split mode Live ModeSwitching the screen mode Auto Sequence10-16 Channel SettingManual Switching Channel CH 13~16 Auto SequenceSpot OUT Selecting a Spot Out modeSwitching to Single Mode Multichannel Live MenuAudio ON/OFF Audio ON/OFF in Single modeZoom FreezeEvent Monitoring Setting the Date/Time/Language System SetupDate/Time/Language Setting Holiday Using the CalendarYou can set and change Administrator’s ID and password Setting the AdministratorUsing Virtual Keyboard When the administrator setup is done, press OKSetting the Group To set the group authorityTo restrict the user permissions To change the user passwordLogin UserWhen the user setup is done, press OK Setting the UserSetting Permissions  Using the DVRChecking the System Information System ManagementSystem Management BroadcastS/W Upgrade  UsingSystem Upgrade Updating the SoftwareLog Information SettingsSystem Log Event Log Backup LogBackup Log Use the up/down buttonsCamera Setting the DeviceSetting the Camera Press Enter buttonUsingthe DVR Setting the PTZWhen the camera setup is done, press OK Item, and select itYou can check information on storage devices Storage DeviceConfirming Devices Assigned numbersYou can format a storage device HDD AlarmFormatting Select FormatItem, and press Enter button Remote DevicesPOS Devices Remote DevicePreset Setup POS Device SetupSync Channel Setup Add PresetMonitor Setting the MonitorScreen Setup Move to Monitor, and press Enter buttonSelect Mode Use direction buttons Setting the Spot OutSetting the Screen Mode Select Spot Out Use direction buttonsRecord Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration REC Quality / ResolutionSetting Standard Recording Properties Recording Color TagsRecord Option Setting Event Recording PropertiesRecord Option EventSetting the Event Sensor DetectionTo set the area using Individual selection Setting the Motion Detection AreaWindow of motion detection area setup appears Motion DetectionAlarm Schedule Video Loss DetectionYou can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolSetting the Protocol Move to Connection Mode, and press EnterWhen no router is used Connecting and Setting the Network Refer to Ddns Setting. When a router is used Internal Port Range Set the same to the External Port RangeLive Transfer Ddns SettingLive Transfer Smtp Setting Mailing ServiceEvent Setting When the recipient setting is done, press OK Group SettingRecipient Setting GroupAdd recipientPTZ Device Using the PTZ cameraControlling a PTZ Device Getting started with PTZCamera Setting Preset SettingExit System Info Search Time SearchEvent Search Backup SearchRefer to Type in Backup Setting the Backup. Search & PlaySelect POS Search in the Search menu Use direction buttons POS SearchMotion Search POS SearchPlay Backup RangePlayback PlayUsing the Playback Button Introducing WEB Viewer What is Web Viewer? WEB Viewer Connecting WEB Viewer Using Live Viewer Single Mode You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode Sixteen Mode Full Screen ModeSetting the display of the OSD time information Channels 10~16 Sixteen MODE, the screen is refreshedChannel DVR CH1 to CH4 CH5 to CH8 CH9 to CH12Capture Saves the current screen into a BMP or Jpeg file Changing the Live Screen Channel Web viewer Using Search Viewer Quad Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar System Viewer SetupYou can configure the various settings of the DVR system Date/Time/LanguageHoliday Permission ManagementSystem Management Camera DeviceStorage Device POS Device Remote DeviceMonitor Record For more information, refer to Setting the Recording.Recording Schedule Event Record Duration REC Quality & ResolutionEvent Record OptionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionConnection You can check the Ddns settingsNetwork Live TransferMailing Service SmtpAbout What is Mobile Viewer?Key Features Mobile ViewerSEC Backup Viewer Recommended System Requirements Backup Viewer Ntsc Product SpecificationPAL Hdmi YESRTSP/RTPUDP, CGI, Http  AppendixUSB AdpcmERNA/ GE/ VCL TP/VICON Product Overview Default Setting ManagementCategory Details Factory Default DurationSmtp Troubleshooting Quick start guide backup, search HDD installed. Try again with a different HDDBy the service personnel To the Internet using the router section in this manual4CIF2CIFCIF Version 2, June Open Source License Report on the ProductPreamble USAPage No Warranty How to Apply These Terms to Your New Programs Terms and Conditions Source CodeConveying Verbatim Copies Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsUse with the GNU Affero General Public License PatentsRevised Versions of this License Interpretation of Sections 15 Limitation of LiabilityEND of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries OpenSSL License Original SSLeay LicensePage Correct disposal of batteries in this product Channel Channel DVR Sales Network
Related manuals
Manual 2 pages 22.54 Kb
Top Page Image Contents