Samsung SRD-852D Getting Started, Starting the system, Shutting Down the System,  Live

Page 23

live

GETTING STARTED

Starting the system

1.Connect the power cable of the DVR to the wall outlet.

2.Press the Power button on the front panel.

REC

 LIVE

3.You will see the initialization screen.

The initialization process will last about 1 minute.

If a new HDD is installed, the initialization process may take longer.

4.The live screen appears with a beep.

Shutting Down the System

REC

2011-01-01 01:10:25

2011-01-01 01:10:25

You can shut down the system only if you have logged in to the DVR.

You require permission to shut down the system if you are not logged in as admin.

1.Press the [POWER] button on the remote control or the front panel, or right-click to display the context sensitive menu and select <Shutdown>.

2.The “Shutdown” conﬁrmation window appears.

3.Use the arrow keys on the remote control or the front panel to move to <OK> and press the [ENTER] button or click <OK>.

The system will shut down.

M For the permission management, refer to “Permission Management > Setting Permissions”. (Page 39)

2011-01-01 01:10:25

Shutdown

Are you sure to shutdown?

OK Cancel

2011-01-01 01:10:25

English _23

Image 23

Contents SRD-852D/1652D Overview Features Overview Important Safety InstructionsContinuous standard load 0.2mA Before StartNormal capacity 170mAh Standards Approvals Package ContentsContents SEC Backup Viewer Using Live ViewerUsing Search Viewer Viewer SetupSRD-852D Part Names and Functions FrontAudio AlarmREC ModeSRD-852D SRD-1652D Part Names and Functions RearVGA Audio OUTVideo Video OUTPress each button between 1 to Remote ControlUsing the Numeric buttons ChannelPress any button among 1 to Changing the Remote Control IDPlease take note of the followings before using this product Checking the Installation EnvironmentHDD Addition Rack InstallationInstallation First, loosen the screws on both sides and remove the cover If adding HDDsEnglish  The following ﬁgures are based on Model SRD-1652D Connecting the VIDEO, AUDIO, and MonitorConnecting the USB  Connecting with Other Device Connecting POS DeviceConnecting the Alarm INPUT/OUTPUT Connecting the RS-485 Device Connecting to the Internet using the router Connecting the NetworkConnecting to Internet through Ethernet 10/100BaseT Connecting to Internet through Adsl  Live Getting StartedStarting the system Shutting Down the SystemYou will see the context sensitive menu as in the right Login By default, initial ID and password are set to admin, Locking All ButtonsIcons on the Live Screen Live Screen ConfigurationLive Screen Menu Error InformationSplit Mode Menu Split Mode MenuZoom Single Mode MenuSystem Date/Time/Language Time.  SRD-852D do not support the 16-split screen modePTZ Alarm Freeze View the Launcher MenuAuto Sequence Live ModeSwitching the screen mode Switching the split modeChannel CH 13~16 Auto Sequence Channel SettingManual Switching 10-16Multichannel Live Menu Selecting a Spot Out modeSwitching to Single Mode Spot OUTFreeze Audio ON/OFF in Single modeZoom Audio ON/OFFEvent Monitoring Date/Time/Language System SetupSetting the Date/Time/Language Using the Calendar Setting HolidayWhen the administrator setup is done, press OK Setting the AdministratorUsing Virtual Keyboard You can set and change Administrator’s ID and passwordTo set the group authority Setting the GroupUser To change the user passwordLogin To restrict the user permissions Using the DVR Setting the UserSetting Permissions When the user setup is done, press OKSystem Management System ManagementChecking the System Information Updating the Software  UsingSystem Upgrade BroadcastS/W UpgradeSystem Log SettingsLog Information Use the up/down buttons Backup LogBackup Log Event LogPress Enter button Setting the DeviceSetting the Camera CameraItem, and select it Setting the PTZWhen the camera setup is done, press OK Usingthe DVRAssigned numbers Storage DeviceConﬁrming Devices You can check information on storage devicesSelect Format HDD AlarmFormatting You can format a storage deviceRemote Device Remote DevicesPOS Devices Item, and press Enter buttonAdd Preset POS Device SetupSync Channel Setup Preset SetupMove to Monitor, and press Enter button Setting the MonitorScreen Setup MonitorSelect Spot Out Use direction buttons Setting the Spot OutSetting the Screen Mode Select Mode Use direction buttonsRecording Schedule Setting the RecordingRecording Schedule RecordRecording Color Tags REC Quality / ResolutionSetting Standard Recording Properties Event Record DurationEvent Setting Event Recording PropertiesRecord Option Record OptionSensor Detection Setting the EventMotion Detection Setting the Motion Detection AreaWindow of motion detection area setup appears To set the area using Individual selectionVideo Loss Detection Alarm ScheduleBackup BackupSetting the Backup You can backup the desired data to a connected deviceYou can set the network connection route and protocol Network ConfigurationConnection Mode Setting the ConnectionMove to Connection Mode, and press Enter Setting the Protocol Refer to Ddns Setting. Connecting and Setting the NetworkWhen no router is used Internal Port Range Set the same to the External Port Range When a router is usedLive Transfer Ddns SettingLive Transfer Event Setting Mailing ServiceSmtp Setting GroupAdd recipient Group SettingRecipient Setting When the recipient setting is done, press OKGetting started with PTZ Using the PTZ cameraControlling a PTZ Device PTZ DeviceExit System Info Preset SettingCamera Setting Time Search SearchSearch & Play Backup SearchRefer to Type in Backup Setting the Backup. Event SearchPOS Search POS SearchMotion Search Select POS Search in the Search menu Use direction buttonsPlay Backup RangePlayback PlayUsing the Playback Button  WEB Viewer What is Web Viewer?Introducing WEB Viewer Connecting WEB Viewer Using Live Viewer Full Screen Mode You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode Sixteen Mode Single ModeChannels 10~16 Sixteen MODE, the screen is refreshed Setting the display of the OSD time informationCapture Saves the current screen into a BMP or Jpeg ﬁle CH1 to CH4 CH5 to CH8 CH9 to CH12Channel DVR Changing the Live Screen Channel Web viewer Using Search Viewer Quad Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Date/Time/Language Viewer SetupYou can conﬁgure the various settings of the DVR system SystemPermission Management HolidaySystem Management Storage Device DeviceCamera Monitor Remote DevicePOS Device Recording Schedule For more information, refer to Setting the Recording.Record Record Option REC Quality & ResolutionEvent Event Record DurationVideo Loss Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Motion DetectionLive Transfer You can check the Ddns settingsNetwork ConnectionSmtp Mailing ServiceMobile Viewer What is Mobile Viewer?Key Features AboutRecommended System Requirements SEC Backup Viewer Backup Viewer PAL Product SpecificationNtsc  Appendix YESRTSP/RTPUDP, CGI, Http HdmiERNA/ GE/ VCL TP/VICON AdpcmUSB Product Overview Management Default SettingDuration Category Details Factory DefaultSmtp Troubleshooting To the Internet using the router section in this manual HDD installed. Try again with a different HDDBy the service personnel Quick start guide backup, search4CIF2CIFCIF USA Open Source License Report on the ProductPreamble Version 2, JunePage No Warranty How to Apply These Terms to Your New Programs Source Code Terms and ConditionsConveying Verbatim Copies Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesRevised Versions of this License PatentsUse with the GNU Affero General Public License END of Terms and Conditions Limitation of LiabilityInterpretation of Sections 15 Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries Original SSLeay License OpenSSL LicensePage Correct disposal of batteries in this product Channel Channel DVR Sales Network

Related manuals

Manual 2 pages 22.54 Kb