Samsung SRD-852D user manual Product Specification, Ntsc, Pal

Page 98

appendix

PRODUCT SPECIFICATION

	Item			Details
	Item		SRD-1652D		SRD-852D
			SRD-1652D		SRD-852D
Video		Inputs	16 composite video 0.5–1 Vpp		8 composite video 0.5–1 Vpp
Video		Resolution	704x480 NTSC, 704x576 PAL
		Resolution	704x480 NTSC, 704x576 PAL
		Frame rate	480ips NTSC, 400ips PAL		240ips NTSC, 200ips PAL
Live		Resolution	704x480 NTSC, 704x576 PAL
		Multi Screen display	1/4/6/8/9/13/16/PIP		1/4/6/8/9/13/PIP
Performance
OS		Embedded	Linux
		Compression	H.264
			NTSC : Up to 120ips @ 704x480		NTSC : Up to 60ips@ 704x480
			PAL : Up to 100ips @ 704x576		PAL : Up to 50ips@ 704x576
		Record Rate	NTSC : Up to 240ips @ 704x240		NTSC : Up to 120ips @ 704x240
			PAL : Up to 200ips @ 704x288		PAL : Up to 100ips @ 704x288
			NTSC : Up to 480ips @ 352x240		NTSC : Up to 240ips @ 352x240
			PAL : Up to 400ips @ 352x288		PAL : Up to 200ips @ 352x288
			NTSC :
			- Manual
			- Schedule (Continuous/Event)
Recording			- Event(Pre/Post)
		Mode	- Time lapse (0.9/1.9/3.8/7.5/15/30 ips)
		Mode	PAL :
			PAL :
			- Manual
			- Schedule (Continuous/Event)
			- Event(Pre/Post)
			- Time lapse (0.8/1.6/3.1/6.2/12.5/25 ips)
		Overwrite modes	Continuous
		Pre-alarm	Up to 5sec
		Post-Alarm	Up to 6 hour. (5, 10, 20, 30 sec,1, 3, 5, 10, 20 min,1, 2, 3, 4, 5, 6 hour)
		Search mode	Date/time, Event, Back up, Pos, Motion (※All Search Included Preview Function)
Search &Playback			Fast Forward / Backward
		Playback function	Slow Forward / Backward
			Step Forward / Backward

98_ appendix

Image 98

Contents SRD-852D/1652D Features OverviewImportant Safety Instructions  OverviewContinuous standard load 0.2mA Before StartNormal capacity 170mAh Package Contents Standards ApprovalsContents Viewer Setup Using Live ViewerUsing Search Viewer SEC Backup ViewerPart Names and Functions Front SRD-852DMode AlarmREC AudioPart Names and Functions Rear SRD-852D SRD-1652DVideo OUT Audio OUTVideo VGAChannel Remote ControlUsing the Numeric buttons Press each button between 1 toChanging the Remote Control ID Press any button among 1 toChecking the Installation Environment Please take note of the followings before using this productHDD Addition Rack InstallationInstallation If adding HDDs First, loosen the screws on both sides and remove the coverEnglish  The following ﬁgures are based on Model SRD-1652D Connecting the VIDEO, AUDIO, and MonitorConnecting the USB  Connecting with Other Device Connecting POS DeviceConnecting the Alarm INPUT/OUTPUT Connecting the RS-485 Device Connecting to the Internet using the router Connecting the NetworkConnecting to Internet through Ethernet 10/100BaseT Connecting to Internet through Adsl Shutting Down the System Getting StartedStarting the system  LiveLocking All Buttons Login By default, initial ID and password are set to admin, You will see the context sensitive menu as in the rightLive Screen Configuration Icons on the Live ScreenSplit Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu ZoomView the Launcher Menu  SRD-852D do not support the 16-split screen modePTZ Alarm Freeze System Date/Time/Language Time.Switching the split mode Live ModeSwitching the screen mode Auto Sequence10-16 Channel SettingManual Switching Channel CH 13~16 Auto SequenceSpot OUT Selecting a Spot Out modeSwitching to Single Mode Multichannel Live MenuAudio ON/OFF Audio ON/OFF in Single modeZoom FreezeEvent Monitoring Date/Time/Language System SetupSetting the Date/Time/Language Setting Holiday Using the CalendarYou can set and change Administrator’s ID and password Setting the AdministratorUsing Virtual Keyboard When the administrator setup is done, press OKSetting the Group To set the group authorityTo restrict the user permissions To change the user passwordLogin UserWhen the user setup is done, press OK Setting the UserSetting Permissions  Using the DVRSystem Management System ManagementChecking the System Information BroadcastS/W Upgrade  UsingSystem Upgrade Updating the SoftwareSystem Log SettingsLog Information Event Log Backup LogBackup Log Use the up/down buttonsCamera Setting the DeviceSetting the Camera Press Enter buttonUsingthe DVR Setting the PTZWhen the camera setup is done, press OK Item, and select itYou can check information on storage devices Storage DeviceConﬁrming Devices Assigned numbersYou can format a storage device HDD AlarmFormatting Select FormatItem, and press Enter button Remote DevicesPOS Devices Remote DevicePreset Setup POS Device SetupSync Channel Setup Add PresetMonitor Setting the MonitorScreen Setup Move to Monitor, and press Enter buttonSelect Mode Use direction buttons Setting the Spot OutSetting the Screen Mode Select Spot Out Use direction buttonsRecord Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration REC Quality / ResolutionSetting Standard Recording Properties Recording Color TagsRecord Option Setting Event Recording PropertiesRecord Option EventSetting the Event Sensor DetectionTo set the area using Individual selection Setting the Motion Detection AreaWindow of motion detection area setup appears Motion DetectionAlarm Schedule Video Loss DetectionYou can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolSetting the Protocol Move to Connection Mode, and press Enter Refer to Ddns Setting. Connecting and Setting the NetworkWhen no router is used When a router is used Internal Port Range Set the same to the External Port RangeLive Transfer Ddns SettingLive Transfer Event Setting Mailing ServiceSmtp Setting When the recipient setting is done, press OK Group SettingRecipient Setting GroupAdd recipientPTZ Device Using the PTZ cameraControlling a PTZ Device Getting started with PTZExit System Info Preset SettingCamera Setting Search Time SearchEvent Search Backup SearchRefer to Type in Backup Setting the Backup. Search & PlaySelect POS Search in the Search menu Use direction buttons POS SearchMotion Search POS SearchPlay Backup RangePlayback PlayUsing the Playback Button  WEB Viewer What is Web Viewer?Introducing WEB Viewer Connecting WEB Viewer Using Live Viewer Single Mode You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode Sixteen Mode Full Screen ModeSetting the display of the OSD time information Channels 10~16 Sixteen MODE, the screen is refreshedCapture Saves the current screen into a BMP or Jpeg ﬁle CH1 to CH4 CH5 to CH8 CH9 to CH12Channel DVR Changing the Live Screen Channel Web viewer Using Search Viewer Quad Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar System Viewer SetupYou can conﬁgure the various settings of the DVR system Date/Time/LanguageHoliday Permission ManagementSystem Management Storage Device DeviceCamera Monitor Remote DevicePOS Device Recording Schedule For more information, refer to Setting the Recording.Record Event Record Duration REC Quality & ResolutionEvent Record OptionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionConnection You can check the Ddns settingsNetwork Live TransferMailing Service SmtpAbout What is Mobile Viewer?Key Features Mobile ViewerSEC Backup Viewer Recommended System Requirements Backup Viewer PAL Product SpecificationNtsc Hdmi YESRTSP/RTPUDP, CGI, Http  AppendixERNA/ GE/ VCL TP/VICON AdpcmUSB Product Overview Default Setting ManagementCategory Details Factory Default DurationSmtp Troubleshooting Quick start guide backup, search HDD installed. Try again with a different HDDBy the service personnel To the Internet using the router section in this manual4CIF2CIFCIF Version 2, June Open Source License Report on the ProductPreamble USAPage No Warranty How to Apply These Terms to Your New Programs Terms and Conditions Source CodeConveying Verbatim Copies Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsRevised Versions of this License PatentsUse with the GNU Affero General Public License END of Terms and Conditions Limitation of LiabilityInterpretation of Sections 15 Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries OpenSSL License Original SSLeay LicensePage Correct disposal of batteries in this product Channel Channel DVR Sales Network

Related manuals

Manual 2 pages 22.54 Kb