Samsung SRD-852D Setting the Spot Out, Setting the Screen Mode, Select Mode Use direction buttons

Setting the Spot Out

You can set the DVR to output information / video apart from the monitor out.

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to
2.	move to <Monitor>, and press [ENTER] button.
	Select <Spot Out>.
3.	Use direction buttons (	) to move to a desired
	item, and set the value.

•Spot Out 1 : Specify a single channel for output.

You can set the dwell time between the screen switching in “Setting the Device > Camera > SEQ-Dwell Time”. (Page 44)

M You can setup using the mouse right button in Live screen. Refer to “Spot Out”. (Page 31)

4.When the Spot Out is done, press <OK>.

Monitor
Monitor	Spot Out	Mode
x Spot Out 1	Single	Set Mode	CH 1
		Set Mode
		Set Mode
		Set Mode
			 USING
	OK	Cancel	THE DVR
Monitor
Monitor	Spot Out	Mode

x Spot Set Spot Out

	1	2	Set Mode	4
			3
	5	6	Set Mode	8
			7
9		10	11	12
13		14	15	16

OK

OK Cancel

Setting the Screen Mode

You can configure the Live screen and Split Screens.

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to
2.	move to <Monitor>, and press [ENTER] button.
	Select <Mode>.
3.	Use direction buttons (	) to move to a desired
	item, and set the value.

•Live Screen : Select split modes for the Live screen.

16-, 9-, and 4-split screens are included by default.

•Play Screen : Select split modes for the playback screen. Only the 13-split screen is optional.

Black shows the playback while white shows the Live screen.

4.When the screen mode setup is done, press <OK>.

Monitor

Monitor

Live Screen

Play Screen

Spot Out Mode

LivePlay

OK Cancel

English _51