Samsung SRD-852D user manual Live Screen Configuration, Icons on the Live Screen

Page 25

LIVE SCREEN CONFIGURATION

Icons on the Live Screen

You can check the status or operation of the DVR with the icons on the live screen.

2011-01-01

00:00:01

LIVE

CAM 01

Name

Description

Current Date, Time

Displays the current time and date.

Login Information

When you are logged in, the “LOG ON” icon will be displayed.

 

Displayed if the zoom function is activated.

Screen Mode

Displayed if you press the Pause button.

Displayed in Auto Sequence mode where all channels are switched at the

 

specific time interval.

 

Displayed if the recording is in process.

 

M To cancel the recording, enter the password.

 

Displayed if there is a problem with the cooling fan.

System Operation

Displayed if the HDD is full and the DVR has an insufficient space to record.

Displayed if no HDD is installed or the existing HDD should be replaced.

 

Displayed if the HDD needs a technical examination.

 

Displayed if a new firmware is found from the network.

Video Input Status

Displayed if no input is entered in the condition that the camera is set to <ON>.

Nothing will be displayed on the screen if the camera is set to <OFF>.

Camera Name/ Channel

Displays the camera name and the changed channel, if any.

 

Displays the resolution of the recording screen. (Page 54)

 

Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.

 

Displays AUDIO ON/MUTE.

Camera Operation

Not displayed in video mode if deactivated.

If the sensor is set to <ON>, the input signal will be displayed on the screen of

 

the connected channel.

 

Displayed if a motion detected in the condition that the motion detection is set to

 

<ON>.

 

Displays the current record mode from Record/Event/Schedule.

English _25

Image 25
Contents SRD-852D/1652D Overview Features Overview Important Safety InstructionsNormal capacity 170mAh Before StartContinuous standard load 0.2mA Standards Approvals Package ContentsContents Using Search Viewer Using Live ViewerViewer Setup SEC Backup ViewerSRD-852D Part Names and Functions FrontREC AlarmMode AudioSRD-852D SRD-1652D Part Names and Functions RearVideo Audio OUTVideo OUT VGAUsing the Numeric buttons Remote ControlChannel Press each button between 1 toPress any button among 1 to Changing the Remote Control IDPlease take note of the followings before using this product Checking the Installation EnvironmentInstallation Rack InstallationHDD Addition First, loosen the screws on both sides and remove the cover If adding HDDsEnglish Connecting the USB Connecting the VIDEO, AUDIO, and Monitor The following figures are based on Model SRD-1652D Connecting the Alarm INPUT/OUTPUT Connecting POS Device Connecting with Other Device Connecting the RS-485 Device Connecting to Internet through Ethernet 10/100BaseT Connecting the NetworkConnecting to the Internet using the router Connecting to Internet through Adsl Starting the system Getting StartedShutting Down the System  Live By default, initial ID and password are set to admin, LoginLocking All Buttons You will see the context sensitive menu as in the rightIcons on the Live Screen Live Screen ConfigurationSplit Mode Menu Error InformationSplit Mode Menu Live Screen MenuZoom Single Mode MenuPTZ Alarm Freeze  SRD-852D do not support the 16-split screen modeView the Launcher Menu System Date/Time/Language Time.Switching the screen mode Live ModeSwitching the split mode Auto SequenceManual Switching Channel Setting10-16 Channel CH 13~16 Auto SequenceSwitching to Single Mode Selecting a Spot Out modeSpot OUT Multichannel Live MenuZoom Audio ON/OFF in Single modeAudio ON/OFF FreezeEvent Monitoring Setting the Date/Time/Language System SetupDate/Time/Language Using the Calendar Setting HolidayUsing Virtual Keyboard Setting the AdministratorYou can set and change Administrator’s ID and password When the administrator setup is done, press OKTo set the group authority Setting the GroupLogin To change the user passwordTo restrict the user permissions UserSetting Permissions Setting the UserWhen the user setup is done, press OK  Using the DVRChecking the System Information System ManagementSystem Management System Upgrade  UsingBroadcastS/W Upgrade Updating the SoftwareLog Information SettingsSystem Log Backup Log Backup LogEvent Log Use the up/down buttonsSetting the Camera Setting the DeviceCamera Press Enter buttonWhen the camera setup is done, press OK Setting the PTZUsingthe DVR Item, and select itConfirming Devices Storage DeviceYou can check information on storage devices Assigned numbersFormatting HDD AlarmYou can format a storage device Select FormatPOS Devices Remote DevicesItem, and press Enter button Remote DeviceSync Channel Setup POS Device SetupPreset Setup Add PresetScreen Setup Setting the MonitorMonitor Move to Monitor, and press Enter buttonSetting the Screen Mode Setting the Spot OutSelect Mode Use direction buttons Select Spot Out Use direction buttonsRecording Schedule Setting the RecordingRecord Recording ScheduleSetting Standard Recording Properties REC Quality / ResolutionEvent Record Duration Recording Color TagsRecord Option Setting Event Recording PropertiesRecord Option EventSensor Detection Setting the EventWindow of motion detection area setup appears Setting the Motion Detection AreaTo set the area using Individual selection Motion DetectionVideo Loss Detection Alarm ScheduleSetting the Backup BackupYou can backup the desired data to a connected device BackupConnection Mode Network ConfigurationSetting the Connection You can set the network connection route and protocolMove to Connection Mode, and press Enter Setting the ProtocolWhen no router is used Connecting and Setting the Network Refer to Ddns Setting. Internal Port Range Set the same to the External Port Range When a router is usedLive Transfer Ddns SettingLive Transfer Smtp Setting Mailing ServiceEvent Setting Recipient Setting Group SettingWhen the recipient setting is done, press OK GroupAdd recipientControlling a PTZ Device Using the PTZ cameraPTZ Device Getting started with PTZCamera Setting Preset SettingExit System Info Time Search SearchRefer to Type in Backup Setting the Backup. Backup SearchEvent Search Search & PlayMotion Search POS SearchSelect POS Search in the Search menu Use direction buttons POS SearchPlayback Backup RangePlay PlayUsing the Playback Button Introducing WEB Viewer What is Web Viewer? WEB Viewer Connecting WEB Viewer Using Live Viewer Single Mode Quad Mode Nine Mode Sixteen Mode You can change the split mode by clicking each number iconSingle Mode Full Screen ModeChannels 10~16 Sixteen MODE, the screen is refreshed Setting the display of the OSD time informationChannel DVR CH1 to CH4 CH5 to CH8 CH9 to CH12Capture Saves the current screen into a BMP or Jpeg file Changing the Live Screen Channel Web viewer Using Search Viewer Quad Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar You can configure the various settings of the DVR system Viewer SetupSystem Date/Time/LanguagePermission Management HolidaySystem Management Camera DeviceStorage Device POS Device Remote DeviceMonitor Record For more information, refer to Setting the Recording.Recording Schedule Event REC Quality & ResolutionEvent Record Duration Record OptionYou can set the alarm output time if a video loss occurs Alarm ScheduleMotion Detection Video Loss DetectionNetwork You can check the Ddns settingsConnection Live TransferSmtp Mailing ServiceKey Features What is Mobile Viewer?About Mobile ViewerRecommended System Requirements SEC Backup Viewer Backup Viewer Ntsc Product SpecificationPAL RTSP/RTPUDP, CGI, Http YESHdmi  AppendixUSB AdpcmERNA/ GE/ VCL TP/VICON Product Overview Management Default SettingDuration Category Details Factory DefaultSmtp Troubleshooting By the service personnel HDD installed. Try again with a different HDDQuick start guide backup, search To the Internet using the router section in this manual4CIF2CIFCIF Preamble Open Source License Report on the ProductVersion 2, June USAPage No Warranty How to Apply These Terms to Your New Programs Source Code Terms and ConditionsConveying Verbatim Copies Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesUse with the GNU Affero General Public License PatentsRevised Versions of this License Interpretation of Sections 15 Limitation of LiabilityEND of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries Original SSLeay License OpenSSL LicensePage Correct disposal of batteries in this product Channel Channel DVR Sales Network
Related manuals
Manual 2 pages 22.54 Kb