Samsung SRD-852D user manual Setting the Event, Sensor Detection

SETTING THE EVENT

You can set recording options for sensor, motion, and video loss event.

Sensor Detection

You can set the sensor’s operating condition and connected camera, as well as alarm output and its duration.

Using the mouse may help make setup easier.

1.Press the [MENU] button on the remote control or front panel.

2.Use the left/right button (◄ ►) to select <Event>. Event setting menu is selected.

Logout

Event

Sensor Detection

Motion Detection

Video Loss Detection

Alarm Schedule

Exit

 USING THE DVR

3.	Use the up/down buttons (	) to move to <Sensor
	Detection>, and press [ENTER] button.
4.	A window of sensor detection setup appears.
	Use direction buttons (	) to move to a desired
	item, and set the value.

•Sensor Operation : Sets the operation mode of sensors.

-<OFF> : Sensor does not operate.

-<N.O (Normal Open)> : Sensor is opened. If the sensor is closed, it generates alarm.

-<N.C (Normal Close)> : Sensor is closed.

If the sensor is open by interruption, it generates alarm.

•Cam : Select a channel to be connected to the sensor.

If selected camera, “Cam Preset setup” window appears. Select a channel and setup the preset.

 Preset setup can be done in PTZ mode. Refer to “Preset Setting”. (page 67)

Sensor Detection

Sensor	Sensor Operation	Cam	Alarm	Duration
1	OFF	1	None	10 sec
2	OFF	2	None	10 sec
3	OFF	3	None	10 sec
4	OFF	4	None	10 sec
5	OFF	5	None	10 sec
6	OFF	6	None	10 sec
7	OFF	7	None	10 sec
8	OFF	8	None	10 sec
				Previous/Next Page
		OK	Cancel

Sensor Detection
SensorCam Preset setup
1	CH		OFF	Preset	1	CH	None	10 sec
2			OFF		2		None	Preset
		1		None				10 sec
3			OFF		3		9	None
		2		None			None	10 sec
4			OFF		4		10	None
		3		None			None	10 sec
5			OFF		5		11	None
		4		None			None	10 sec
6			OFF		6		12	None
		5		None			None	10 sec
7			OFF		7		13	None
		6		None			None	10 sec
8			OFF		8		14	None
		7		None			None	10 sec
							15	None
		8		None			16	Previous/NextNone	Page
					OK	Cancel
					OK	Cancel

•Alarm : Sets the alarm output method.

For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 47)

•Duration : Sets the duration of alarm signal and alarm sound.

5.When the sensor detection setup is done, press <OK>.

Sensor Detection
Sensor	Sensor Operation		Cam			Alarm		Duration
1	OFF			1		None		10 sec
2	OFF			2		None		10 sec
3	Alarm Setup
4	OFF	1		4	2	None	3	10 sec
5	OFF			5		None		10 sec
6	OFF	4		6	BEEP	None	All	10 sec
7	OFF		OK	7		None		10 sec
8	OFF			8	Cancel			10 sec
						None
							Previous/Next Page
			OK		Cancel

English _55