Samsung SRD-852D Storage Device, Confirming Devices, You can check information on storage devices

using the DVR

Storage Device

You can check information on storage devices.

Confirming Devices

You can check storage devices and their free space, usage as well as status. Devices available are HDD, and USB devices (Memory, HDD, CD/DVD).

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Device> window to move to <Storage Device>, and press [ENTER] button.

2.Select <Device>.

•No. : Shows the assigned number of the internal HDD.

To see the detailed positioning of the HDD according to the number, refer to <HDD Map>.

•Used/Total : Shows the used/total capacity of the storage device.

•Usage : Sets the storage device’s usage. - USB memory is used only for backups.

Storage Device
Device		Format	HDD Alarm
Device	No.	Used/Total	Usage	Status/Management
HDD	1	12.28G/499.37G	Internal	Normal
CD/DVD	–	0 / 0	Backup	Normal
HDD Map
		OK	Cancel

External USB HDD, SATA HDD are used for extension and backup.

A maximum of 2TB for each port is supported for backup on a high capacity SATA HDD such as RAID equipment (ex: SVS-5R), and a maximum of 4TB for extension purposes.

SVS-5R supports only RAID1 and RAID5.

•Status/Management : Shows the current status of the HDD, as in Normal/Check/Replace.

- Normal : Available to use

- Check : Available to use but recommended to replace

- Replace : Requires immediate replacement.

• HDD Map : Shows the internal HDD’s locations according to	HDD Map
assigned numbers.
 Refer to this for servicing or additional HDD installation.
3. To move to the previous menu, press <OK>.

OK

<SRD-852D/1652D>

46_ using the DVR