UCommand User’s Guide
∙Be sure to replace the batteries if they have been used for longer than two years: there might be a danger of leakage.
∙Your device configuration data is stored in
The LCD
The LCD (Liquid Crystal Display) touch screen enables you to configure and operate your UCommand with the touch of a finger.
Turning the LCD on
To turn the LCD panel on, simply tap the screen with your finger:
1
1
Figure 2-3: Turning the LCD on
Touch Screen Precautions
Please read the following instructions carefully:
∙Tap the LCD touch screen gently; never use force.
∙Do not use a pen or any sharp object to tap the screen; otherwise, you might damage the surface. You can use a blunt object such as a pencil eraser or the cap of a pen.
∙Keep the LCD dry. Wipe off any spills immediately. UCommand is not waterproof; never immerse it in liquid.
∙Don’t expose UCommand to extreme temperatures. Keep it away from heat sources.
The LCD | 7 |