Crisp Solutions manual Operating UCommand UC-515

Chapter 3-Operating UCommand UC-515

First, press the button that you want to become the macro button. You can choose a button from any device screen.

Then record the macro by pressing the desired command buttons. For details, refer to the next section: Macro example.

The original function of the button will be lost. Therefore, you should choose a button that you do not use in normal operation.

Press the Learn button to end any macro recording.

If you want to record another macro, press another key and record the macro. Otherwise, press Learn to exit the macro setup.

1

1

If necessary, you can set a time-limit delay between each run command. Refer to the next section, Macro example.

24