![](/images/new-backgrounds/1244297/24429773x1.webp)
UCommand User’s Guide
UCommand detects the ambient lighting and will turn the backlight on according to the setting in this screen.
Press the Up arrow key to increase the sensitivity of the backlight to the ambient lighting.
When set to 1, the backlight will automatically switch on after a small decrease in the ambient light brightness.
Press the down arrow key to decrease the sensitivity of the backlight to the ambient lighting.
When set to 10, the backlight will automatically switch on after a large decrease in the ambient light brightness.
1 |
Current |
level |
1 |
Adjusting the LCD Backlight | 31 |