UCommand User’s Guide
Macro Example
The following example will help you to better understand recording a macro. This macro would be used to turn on your TV, switch to VCR input, and start playing a tape:
Press the macro button for three seconds to enter macro setup mode.
1 |
Press each number button until it disappears.
Press the AUX button to open the AUX screen. Then press 1. You will hear three beeps.
The 1 button in the AUX screen will be used to start the macro during normal operation mode.
Note: Do not use a device button as your macro run button.
B.Press AUX to open the AUX screen
B. Press 1 to assign the macro start button
Macro Function | 25 |